![]() |
How do I unlock the higher multipliers? 1600+ I can't get anything above 12x. In fact 15x remaps to 8x. Maybe somebody can decipher this: http://www.beachlink.com/candjac/PaloDecode0.htm#Later I don't get it. |
Why would you want higher mults? just ramp the FSB up :) 12x190= 2280 which is probably a lot more than your chip will manage! 190 is an attainable FSB, even 166X12 is 1992 which again is probably just out of reach! |
Iwill KK266 is why. No 1/5th divider or SDRAM that will hit it anyway. I fried a modem trying. |
Re: How do I unlock the higher multipliers? 1600+ Quote:
|
AMD 1600+ |
THis is only my theory, but since 2200+ is unlocked but only has higher multipliers, and closing a single bridge enables the lower multipliers, maybe on older CPUs, cutting that same bridge might enable the higher multipliers. Just thinking out loud. EDIT: Don't try this please... unless you find some evidence that this is true... I wouldn't want to be responsible for the death of an innocent CPU. |
What bridges? I really don't think that it's like the Tbred. If that were the case I could connect the last L3. hmmmmmmmmm? No...that enables the 12.5 and under. arrrrrrrrrgh! |
There are EPoX boards out now that will take you up to the 2800 chips, not a bad CPU span for the life of a mainboard...you might consider grabbing a deal on one when you can, you get a pretty good upgrade path.... That's if you can't find a way to do the deed on your 1600+ |
Well, if closing that last L3 changes everything over to the lower multipliers, maybe cutting them will switch to the upper multipliers. |
All times are GMT +1. The time now is 10:52 AM. |
Copyright ©2001 - 2010, AOA Forums