AOA Forums

AOA Forums (http://www.aoaforums.com/forum/)
-   AMD Motherboards & CPUs (http://www.aoaforums.com/forum/4-amd-motherboards-and-cpus/)
-   -   Did I kill it? (http://www.aoaforums.com/forum/amd-motherboards-and-cpus/11340-did-i-kill-it.html)

gryphyn 24th November, 2002 08:35 PM

Did I kill it?
 
I have been trying to find the 9-10.5 multipliers on my 1600xp.

After a successful unlock I ran the 200x9 for a day or two, then noticed my system wasn't quite as quick as usual, after checking it out WCPUID showed I was running at 7.0 default. I attempted the process several times to no avail. I'm not able to use 9-10.5 mults.
Sometimes after procedure when I check mults it shows "WCPUID" 7-8.5 as 7-8.5 and 9-10.5 as 7.0, 11=11,11.5=11.5, etc.

When I clean everything off "lock" I get the 10.5 back. Am I missing something or should I pay closer attention to a particular bridge on the L1 procedure?:confused:

Thanks Gryphyn

surlyjoe 24th November, 2002 08:40 PM

I wish I knew, I am haveing a heck of a time with mine as well =P

kowalski 24th November, 2002 11:45 PM

Re: Did I kill it?
 
Quote:

Originally posted by gryphyn
I have been trying to find the 9-10.5 multipliers on my 1600xp.

After a successful unlock I ran the 200x9 for a day or two, then noticed my system wasn't quite as quick as usual, after checking it out WCPUID showed I was running at 7.0 default. I attempted the process several times to no avail. I'm not able to use 9-10.5 mults.
Sometimes after procedure when I check mults it shows "WCPUID" 7-8.5 as 7-8.5 and 9-10.5 as 7.0, 11=11,11.5=11.5, etc.

When I clean everything off "lock" I get the 10.5 back. Am I missing something or should I pay closer attention to a particular bridge on the L1 procedure?:confused:

Thanks Gryphyn

sounds like the unlock went bad. one of the bridges isn't joined properly. happened to me - 9 would give me 7 etc. if you can, check each bridge with a multimeter. might show you which one is bad, unless the bad contact is below the paint, but it's worth a shot. otherwise just re-do it and be real careful. clean the area thoroughly first with alcohol and an eraser.

it's a ball-ache, but it's gotta be done sometimes... :(

gryphyn 25th November, 2002 12:02 AM

Re: Re: Did I kill it?
 
Quote:

Originally posted by kowalski


sounds like the unlock went bad. one of the bridges isn't joined properly. happened to me - 9 would give me 7 etc. if you can, check each bridge with a multimeter. might show you which one is bad, unless the bad contact is below the paint, but it's worth a shot. otherwise just re-do it and be real careful. clean the area thoroughly first with alcohol and an eraser.

it's a ball-ache, but it's gotta be done sometimes... :(

At least there is a light at the end of the tunnel ;) Off to try again

Gryphyn


All times are GMT +1. The time now is 05:07 PM.


Copyright ©2001 - 2010, AOA Forums


Search Engine Friendly URLs by vBSEO 3.3.0