AOA Forums

AOA Forums (http://www.aoaforums.com/forum/)
-   AMD Motherboards & CPUs (http://www.aoaforums.com/forum/4-amd-motherboards-and-cpus/)
-   -   Need Advice On Fsb Issues Please!!!! (http://www.aoaforums.com/forum/amd-motherboards-and-cpus/37217-need-advice-on-fsb-issues-please.html)

Hom3r 13th July, 2006 11:49 AM

Need Advice On Fsb Issues Please!!!!
 
ok so here is my problem, im running my xp3500 at stock with water cooling, so i figured why not push it up, initially i lowered my HT to X4, then using MSI Core Centre i upped my voltage to 1.6v and my fsb from 200 to 240 giving me 2640mhz, but i cant go any further with out the system either crashing or BSOD, here is my stock info via cpuz, http://valid.x86-secret.com/show_oc.php?id=105330
any help would be great!

Thanks

MONKEYMAN 13th July, 2006 11:54 AM

Thats a good speed for a Venice core CPU and I doubt you will get a whole lot more out of it, my advice would be to keep that speed and see how low you can get the Vcore, 1.6v is about as high as I would go with that chip unless you temps are really good.

Also what divider are you running your memory at?

Hom3r 13th July, 2006 12:01 PM

1 Attachment(s)
divider, i have no idea lol, my temps are quite acceptable, 30 @ 0% 40 @ 100% load,

have a look at these http://valid.x86-secret.com/show_oc?id=105405

MONKEYMAN 13th July, 2006 12:28 PM

you need to set your memory speed lower if it is normal DDR400 you are running it way out of spec, try and find a 4/5 or 166mhz divider in your BIOS.

cadaveca 13th July, 2006 04:53 PM

LDt to 3x as well.

Hom3r 13th July, 2006 05:19 PM

1 Attachment(s)
OK, so i set my RAM to 166mhz and my HyperT to 3X and iv now hit the 2.7G mark but my temps have rocketed up to 40ish idle, although it is 1 hell of a hot day today, check out the screen shot, do you guys think i should give it some more or what?

cadaveca 13th July, 2006 05:25 PM

sounds good for a venice...

Hom3r 13th July, 2006 05:35 PM

1 Attachment(s)
i know i can get it higher, although i cant really test it at 2.7G because "system idle precess" is hoggin 100% of my cpu usage and anything i run just stutters!!!! any 1 help me here? also im guessing this is why my "idle" temp hits 40, becasue its not really idle at all

cadaveca 13th July, 2006 05:54 PM

BEfore the system idle process came "into being", your cpu would work @ full load while idle, and be much hotter. this process's job is keeping your cpu cool when not busy. if you are getting freezing, hitchyness, chances are your mobo or ram is not quite stable, or your need more cpu volts.

Hom3r 13th July, 2006 06:43 PM

well il give that a try, but not right now (been in the bar all afteroon) so now isnt the best time to be OC'in, thanks for ur help

gedon 13th July, 2006 07:34 PM

after you've found max cpuclock set commandrate from 2T to 1T. at 1T your memorybandwidth is much higher

Hom3r 14th July, 2006 11:40 AM

1 Attachment(s)
OK heres an update, after following all advice and setting 1T iv now hit 2.75G and still keeping acceptable temps, im going to push for 2.8 and then stop, thanks for all the input guys, il keep u posted!!!!!

UPDATE: MSI CORE CENTRE is a great OC program, but it looks as though iv hit my maximum, not due to CPU/RAM/anything else other then this damn program wont let me take the FSB past 250!!!!!!!! so looks like thats it. Thanks again guys!


All times are GMT +1. The time now is 03:51 PM.


Copyright ©2001 - 2010, AOA Forums


Search Engine Friendly URLs by vBSEO 3.3.0