Lian Li PC75 Mod

[bradmax57]

A couple inside

[bradmax57]

GPU core

[bradmax57]

decided to use the spare dangerden maze 4 gpu block

[bradmax57]

the fitting just below the 24pin psu lead was being fouled so just snipped a bit off

[bradmax57]

Got some new tubing with wire reinforcement built inside the tube works well bends much tighter without kinking, a little on the stiff side compared to Tygon but has done the trick

[bradmax57]

so thats basically where ive got to asfar as pics goes, got a couple of blue led lights to replace the standard ones with but thats pretty much it for now

[bradmax57]

Originally Posted by bradmax57

decided to use the spare dangerden maze 4 gpu block

Waterblock has dropped gpu temps to mid 30's and given about another 25mhz on the core and 40 or so on the mem

[cadaveca]

no ramsinks?

Looking good so far!

[bradmax57]

Originally Posted by cadaveca

no ramsinks?

Looking good so far!

lol only had 5 and funny enough I was going to ask you about that to see if it was worth it, god knows where the others have gone, ill get there

[Daniel ~]

Just like they do in the Big City!!
Looks great!!

[cadaveca]

Originally Posted by bradmax57

lol only had 5 and funny enough I was going to ask you about that to see if it was worth it, god knows where the others have gone, ill get there

Honestly, they aren't needed, but can help. Here's the thing tho...for the ram to keep the same timings at the egde, it all needs to be the same temp. This means sometimes that ram on vidcards will be overvolted on one side of the card to compensate for heat that is present on the other or lack thereof.(and why we have heatspreaders)

Becasue these cards are hugely cpu limited, even @ 3ghz, in SLi, i have put off the modding of them until i get colder temps locally(should see snow by the end of the month hopefully), and because of the current RMA i have going with ASUS.


BTW, rivatuner can enable environment temperature monitoring in the poweruser settings

[bradmax57]

Originally Posted by cadaveca

Honestly, they aren't needed, but can help. Here's the thing tho...for the ram to keep the same timings at the egde, it all needs to be the same temp. This means sometimes that ram on vidcards will be overvolted on one side of the card to compensate for heat that is present on the other or lack thereof.(and why we have heatspreaders)

Becasue these cards are hugely cpu limited, even @ 3ghz, in SLi, i have put off the modding of them until i get colder temps locally(should see snow by the end of the month hopefully), and because of the current RMA i have going with ASUS.


BTW, rivatuner can enable environment temperature monitoring in the poweruser settings

well if I find them ill stick em on

[cadaveca]

I've found they wont let the ram go farther, but they may help with artifacts. I shoulda just said that from the start

[bradmax57]

Originally Posted by cadaveca

I've found they wont let the ram go farther, but they may help with artifacts. I shoulda just said that from the start

LOL, not got any at 510/1350? whats yours like?

[cadaveca]

527/(567)/1370 for the asus, and 524(564)/1423 for the evga. I'm under the stock heatsinks tho because i'm using the asus bios(better clocking on SLI this way for some reason), and the damn coldbug. Haven't tested the Evga bios for coldbug yet, but i'll get around to it in the next few weeks, maybe...christmas is coming again, and i'm about to be VERY VERY busy. I've got jsut about every bios there is so far....the ASUS "top" bois may be nice for your card, but i dunno about coldbug on that one either yet.

[bradmax57]

Originally Posted by cadaveca

527/(567)/1370 for the asus, and 524(564)/1423 for the evga. I'm under the stock heatsinks tho because i'm using the asus bios(better clocking on SLI this way for some reason), and the damn coldbug. Haven't tested the Evga bios for coldbug yet, but i'll get around to it in the next few weeks, maybe...christmas is coming again, and i'm about to be VERY VERY busy. I've got jsut about every bios there is so far....the ASUS "top" bois may be nice for your card, but i dunno about coldbug on that one either yet.

Yeah was going get one of them, if you have the top bios i wouldnt mind giving it a go

[cadaveca]

http://www.mvktech.net/index.php?opt...filecatid=1272

[bradmax57]

Originally Posted by cadaveca

http://www.mvktech.net/index.php?opt...filecatid=1272

Thanks bud!

[bradmax57]

Added some blue uv today but one of my cathodes has died so need some new for it to light up

[Rondog]

Looking awesome man. Keep it up, whatever happend to those two cases that you joined together? Did it actually get finished?