Thermalright Heatsinks

[scottman]

what heat sink is the bested 4 a P4 3.0ghz . i was thinking of puting a 120mm fan on it. Would that be the bested size fan something like
Panaflo 120mm fan, High Speed
120mm Evercool Fan
120mm high speed fan by Sunon. Model KD1212PMB1
120mm Tri-Blue Antec
Thermalright have the bested heatsinks right i was thinking SP94 what the bested
what fan is the bested
http://www.thermalright.com

[scottman]

will it fix on my MAX 3 mb it looks like it is big
(there site say it will fix my bad)

[Gizmo]

I have an SP-97 here, and it is rather large. The SP-94 is similar, I believe. However, the shape should let it clear the caps and stuff around your CPU socket.

As for fan, I believe it comes with clips for 70, 80, and 92 mm fans. I would recommend getting the largest fan you can mount on the heatsink, with the idea being that you can undervolt the fan a little bit to make it quieter. The 92mm Vantec Tornado that I got for the SP-97 keeps the CPU pretty cool, but you really don't want to be in the same room with it.

[scottman]

my bad i thought u could put 120mm fans on them i want a good 92mm ok i start looking

[scottman]

Panaflo 92mm fan, High Speed
2850 RPM fan speed
56.8 CFM air flow
35.0 dBA noise level
Sunon 92mm high-speed Case Fan looks ok lol it had this under the fan on the site i buy from
Fast fans can be dangerous if body parts get caught in them:
how much CFM air flow will i want cause i don't want it loud like a TT fan on high lol
Vantec Tornado 92mm
is crazy how loud is it. It moves 119 CFM i might get 1 of them could. i plug that into my hardcore 10 fan thing that would work right

[Gizmo]

It's about 55 dBA or so, I'm guessing (I don't have a meter). It's quite loud, and the pitch is just this really annoying, nerve grating whine. It runs, I believe, at 5500 RPM.

As for plugging it into your fan controller, I don't know how well that would work. This thing pulls near to 1 amp.

[scottman]

i don't want it loud i need a controler 4 it

[scottman]

so the SP94 is the bested Heat Sink 4 a P4 right

[Gizmo]

The reviews I have read all seem to be pretty high on it. The SP-97 performed quite well for me, and the SP-94 is the same unit, but for a P4.

i run the sp-94 on my intel rig when its not in my mach1 case. the sink works great. i use a tt 80mil smart fan2 and my temps stayed around 32c-36c give or take a few degrees for unknown reasons

peace perc,

[scottman]

i have it with a TT smart fan II it drop temp like 7oC from my old Spark 7+ it is good i coundn't fix it but