Air Pressure

[sonny]

Do any of you guys know the air pressure ratings of the Delta 60mm(38CFM) & 80mm(68CFM)?

[Da Whip]

Here is the link to Delta's Tech Specs;
http://www.deltaww.com/products/dcfans/generic_f.htm[/url]

[sonny]

Thanks for the help but the specs for the fans I mentioned were not there.

[cloasters]

I've read from reliable sources that the only way to duplicate the effectiveness of the infamous Delta 38(with less--or perhaps simply less annoying noise) is to mount the Delta 68 cfm 80mm on a fandapter. Kinda goes to show you that duplicating the Delta 38's air volume, pressure and velocity with a bigger diameter fan is no mean feat! Drat it!!

[sonny]

I'm actually trying to mount a 120mm 130CFM fan to the side of my case & use a velocity stack to direct the air onto my DOrb 3 copper sans fan. I just wanted to make sure that the 120mm fan I ordered has enough pressure for the job. The specs are;

Speed = 2800 RPM

Rated Current = .66 Amps

Power Consumption = 7.92 Watts

Air Flow = 131.5 CFM

Air Pressure = 8.0 mm-Aq

Noise Level = 45 dBA

Suspension = Ball Bearing

Life = 75,000 Hours

Let's keep the thread on the main topic. This should help a few people with some of their cooling problems.

[sonny]

Bump!