4GEA+ / 4PEA+ Vdimm voltage

[leotonch]

I just get one 4GEA+ on hand but notice that the voltage for dimm reported at POST and USDM 3.1 is always 3.2V no matter what I change the value in bios.

I tried all the bios dated 15/10, 30/10 & 02/12. All report 3.2V. Is that I got a defect mobo ? Can anyone tell your Vdimm voltage please !

Thanks !

[pcworks]

I have had the 4GEA+ for the last week. My vdimm is fully selectable from 2.5v -3.2v, I use the latest 031202 bios from the UK epox site. I have found that this board overvolts slightly on Vcore, vdimm and vagp. my celeron2.0ghz runs at 1.525v but usdm says the voltage is 1.536v, vagp is 1.520v and vdimm is 2.560v.
I am really loving this board, the memory performance is superb.
My best overclock of my celeron2.0ghz is a 53% OC to 3.06ghz!!
Are you sure you are reading the correct figure in the magic panel on bootup?
Rob H
Hull

[leotonch]

Hi Rob,

Thanks for your reply. I am going to shutdown the current system as it seems running @vdimm 3.2V already for 8 hrs. Gonna to exchange it from the dealer.

The vdimm readings are from bios pc health menu, post screen , windows usdm & sisoft sandra. So, quite sure I have a defective mobo.

By the way, I also have a 2G celeron @ 3G, but have to push vcore to 1.65v in the bois in order to pass 24hrs 3dmarks looping.