| |||||||
| EPoX MotherBoards EPoX Intel and AMD Motherboards. |
 |
| | LinkBack | Thread Tools | Rate Thread |
21st April, 2003, 07:42 AM
| ||||
| ||||
| Help with COLD BOOT! Hi guys i got epox 4pea+ rev 1.0 using the 1204 bios. my system is using a P4 2.4 C1 533 MHZ fsb, 2 x 512MB twinmos PC3200 (banks 1,2), Leadtek GF4 Ti4800 SE, 80 gig Seagate 7200 rpm, 350W enermax psu, Thermaltake Spark 7 HSF. My problem is i oc'd my comp to 3.06 using 170 FSB, mem timing is 2.5-7-3-3. all defult voltages. I can run any progs without any probs 24/7 (prime UDS seti ,etc). The only problem i have is when i shut down at nights then turn off the surge protector, the next morning i get beeps when i start (siren) i need to hit the reset button for it to boot up. Do u have any suggestions i have RMA'd my board and got another 4PEA+ rev. 1.0 and it still happens? anyone got solution to my problem Thanks in advance. PS the second board i got the new multiplier 3:4 for mem timing.
__________________ Pentium 4 2.4 B C1 SL6EF (2.55 @ 145MHz), 1.525v Epox 4PEA+ rev 1.0 Generic RAM 1x512 PC2700, 2-5-2-2 Leadtek GF4 Ti 4800SE (320/621) Maxtor 80 gig 7200 rpm      |
|
21st April, 2003, 10:45 AM
| |||
| |||
| Try leaving the sureg protector on overnight, maybe your bios battery is weak and you are losing your settings?
__________________ Golf is a good walk spoiled! ( Mark Twain ) Abit NF7-S rev 2.0 Barton 2500 AQZFA0340SPMW 11 x 214 w/SLK900A & 92 mm fan (38 deg C) 2 x WD400JD---Gainward Ti4200 8 X AGP Twinmos PC3200 w/ Winbond chips 2 X 256 600 watt dual fan psu Abit NF7-S rev 2.0 XP1700DLT3C 10 x 225 SK7 with 80mm smartfan ( 37 deg C ) Gainward FX5200 128 Mb DDR 2 x 40 Gb Maxtor ATA 133 drives Buffalo PC3200 2 x 256 CH5 chips 650 watt dual fan power supply WinXP Pro, SP1, nVidia 3.13 on both |
|
21st April, 2003, 11:36 AM
| ||||
| ||||
| Am not losing my settings and my battery is new i changed it too just in case....... I cant let the surge protector on coz my LCD doesnt turn off unless i unplug my comp or turn the surge off  i hope epox does something about this am tired of RMAing my board i like this board a lot got me to 3.2 gig without any probs using 1.575 v only. i just lowered it to be sure since am only on air cooling and its hot where i live  thanks a lot guys i hope someone from epox can do something about this.... Jeff
__________________ Pentium 4 2.4 B C1 SL6EF (2.55 @ 145MHz), 1.525v Epox 4PEA+ rev 1.0 Generic RAM 1x512 PC2700, 2-5-2-2 Leadtek GF4 Ti 4800SE (320/621) Maxtor 80 gig 7200 rpm |
|
13th May, 2003, 12:38 PM
| |||
| |||
| I have da same mobo (European Tipe) Rev1.0 and CPU Me have da same problems during OC If U cannt plug your PC , try to get out the USB and Fireware connect. - thats how I solve that I have HEC psu the smart one 
__________________ |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Rate This Thread | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| C26 cold boot issue | VASkO | EPoX MotherBoards | 0 | 23rd February, 2003 12:07 PM |
| 4PEA+ cold boot | Ganondorf | EPoX MotherBoards | 0 | 16th February, 2003 09:29 AM |
| Cold Boot Errors | Jasonx5213 | EPoX MotherBoards | 24 | 14th February, 2003 09:15 PM |
| Cold Boot and 8K3A+ | Srper | EPoX MotherBoards | 9 | 24th December, 2002 02:21 AM |
| No cold boot :( | LutaWicasa | Hardware Hacking | 6 | 31st December, 2001 10:14 AM |
