AOA Forums AOA Forums AOA Forums Folding For Team 45 AOA Files Home Front Page Become an AOA Subscriber! UserCP Calendar Memberlist FAQ Search Forum Home


Go Back   AOA Forums > Hardware > EPoX MotherBoards

EPoX MotherBoards EPoX Intel and AMD Motherboards.


Reply
 
LinkBack Thread Tools Rate Thread
  #1 (permalink)  
Old 16th May, 2003, 08:20 PM
Member
 
Join Date: December 2002
Posts: 42

Question for my 8rda+

Hello I would either like to pick up an xp 1700 or an 1800 for my board. I hear that they can be overclocked like crazy. However it depend on which chip it is the model and the stepping. can anyone tell me which 1700 and 1800 really overclock? Also is there a site that explains what all the numbers as far as identification and dates what they all mean? would really appreciate it tks
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 16th May, 2003, 08:56 PM
Elisha's Avatar
Member
 
Join Date: April 2003
Posts: 34

the 1700+ JUIHB would be ur best bet.
get an 0310 or 0313.
__________________
AXP 2100+ AUIHB (0304) @10x233 FSB
2330mhz@1.7v
Epox 8RDA+ A1/C1
2x256 Corsair XMS3500
Vantec Aeroflow
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 16th May, 2003, 09:19 PM
Squall's Avatar
Member
 
Join Date: April 2002
Location: UK
Posts: 154

JIUHB DLT3C = 1.5v TBred B
__________________
XP1800 JIUHB DLT3C @ 2.32GHz | Epox 8RDA+ | Alpha PAL8045 | 2 x 256Mb Corsair XMS3500 | Radeon 9500 > 9700 | APU Sound | Seagate Barracuda ATAIV 40Gb | Lite-On 52/24/52 CDRW | Coolermaster ATC-200 | Antec TrueBlue PSU | Sony G200 17" | WinXP Pro
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 16th May, 2003, 09:47 PM
Member
 
Join Date: January 2003
Location: U of K
Posts: 386

Quote:
Originally posted by Squall
JIUHB DLT3C = 1.5v TBred B
Also 0308 is a good week
__________________
He who asks is a fool for 15 minutes, he who does'nt remains a fool forever.

| Abit NF7-S V 2.0 | 1.8v Vdd (modded) | XP 1700+ DLT3C 0319 1.95v @ 2495 Mhz 217 x 11.5 |
| 2 x 256 TwinMos w/ Winbond BH-5 DC 10,2,2,Cas2 @ 3.0v Vdimm (modded) |
| Connect3d ATI Radeon 9800 Pro | Innovatek Water Cooled CPU & NB, actively cooled SB |
| Adaptec 39160 | Seagate Cheetah ST318406LW | ST336706LW | Lite-on CDRW |



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 16th May, 2003, 10:36 PM
Blackmyst's Avatar
Member
 
Join Date: February 2003
Location: Herts, UK
Posts: 268

Did you get my PM aplha?
__________________

EPOX 8RDA3+ rev1.1, 3526 bios, vantec iceberg (nb), zalman gold (sb), heatsinks/fan (mosfets)
XP1800+ slk900 w/92mm vantec tornado, 11 x 215mhz, 1.85v
TWINMOS PC3200 ch-5 winbond, 2x256mb, dc-sync, 8,3,3,2.0, 2.63v
RADEON 9800 PRO 128mb, 380/680
WD RAPTORS 2x36gb, sata raid0
CHEIFTEC CASE enermax 550w
XP HOME sp1, nforce v3.13, catalyst v4.3
3DMARK2001se 18120

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 17th May, 2003, 12:23 AM
Member
 
Join Date: December 2002
Posts: 42

Thanks for all the input I guess my best bet would be some place like PC CLUB because I can go and actually see the chip I know I can to much better with mwave or newegg but I have to be sure. does anyone know if there are certain ones that don't over clock as well tks.
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 17th May, 2003, 12:29 AM
jcool
Guest
 
Posts: n/a

I had 2 JIUHB DLT3C 0308 and both were lousy overclockers...
on the other hand, many people had good luck with their 0308...
The 4 lettres after 0308 seem to be very important, too - mine were RPMW... SPMW and XPMW are far better...
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 17th May, 2003, 12:33 AM
Member
 
Join Date: December 2002
Posts: 42

tks for your input jcool do you know what 4 letters I should be looing for basically my rig is an Abit NF7S 1.0 rev I would like to get a 200 fsb out if it wich I don't think I will have a problem but I would like to get the chip atleast running to 2200-2300 mhz if I can do that I will be very happy Also do you know of a site that breaks dwn all the number and definitions of the chip so I know what I will be looking at when I hit the store tks...
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 17th May, 2003, 12:41 AM
Member
 
Join Date: January 2003
Location: U of K
Posts: 386

Quote:
Originally posted by alpha22555
tks for your input jcool do you know what 4 letters I should be looing for basically my rig is an Abit NF7S 1.0 rev I would like to get a 200 fsb out if it wich I don't think I will have a problem but I would like to get the chip atleast running to 2200-2300 mhz if I can do that I will be very happy Also do you know of a site that breaks dwn all the number and definitions of the chip so I know what I will be looking at when I hit the store tks...
I've had 2 DLT3C 0308 SPMW and they've both clocked to 2.4 gigs, I sold one to my friend and he managed to wring 2.5 gig out of it.

You asked for a guide to decipher the stepping codes earlier this is the only one I could find in my bookmark
__________________
He who asks is a fool for 15 minutes, he who does'nt remains a fool forever.

| Abit NF7-S V 2.0 | 1.8v Vdd (modded) | XP 1700+ DLT3C 0319 1.95v @ 2495 Mhz 217 x 11.5 |
| 2 x 256 TwinMos w/ Winbond BH-5 DC 10,2,2,Cas2 @ 3.0v Vdimm (modded) |
| Connect3d ATI Radeon 9800 Pro | Innovatek Water Cooled CPU & NB, actively cooled SB |
| Adaptec 39160 | Seagate Cheetah ST318406LW | ST336706LW | Lite-on CDRW |



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 17th May, 2003, 01:19 AM
Member
 
Join Date: December 2002
Posts: 42

I have called around and it seams like I cannot find a 0310 stepping. However I found a 0312 anyone know anyhing about that particular one


tks
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old 17th May, 2003, 07:09 AM
Member
 
Join Date: December 2002
Posts: 42

Okay so here is what I got. I could not find a 0310 however I got a 0312. My overclock so for is 200x 11 wcpuid coming out to be 2205mhz I did have to raise the Vcore to get up there though. Right now my Vcore is running at 1.825 Im sure I don't want to push that up anymore my temp reads 110F. The question is how much farther should I push it. From what the numbers come out on the chip it was orginally a 2800. any suggestions on if I should push it more. Currenly running at around 110F using an Akaska Silver Mountain for cooling tks
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old 17th May, 2003, 07:27 AM
Elisha's Avatar
Member
 
Join Date: April 2003
Posts: 34

with air don't push it more than 1.8v unless u have high end air like the slk 800.
you should be able to get at least 2.3 with 1.8v
i can do 2.4 with 1.8v with my 2100+ AUIHB 0301
__________________
AXP 2100+ AUIHB (0304) @10x233 FSB
2330mhz@1.7v
Epox 8RDA+ A1/C1
2x256 Corsair XMS3500
Vantec Aeroflow
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old 17th May, 2003, 09:47 AM
Member
 
Join Date: December 2002
Posts: 42

well no luck seams as though the farthest I can push this chip is 200 x11 If I even go to 205 my machine is alarming. I thought I would be able to do more I have 480w antec and 2 sticks of corsair xms 3500. Not that im complaining I mean 2200mhz is great. just thought I can get a little more but so far no luck. as far as cooling I have an slk 800 in the closet but my akaska does just fine I may only notice 5 degrees different and even after a 3dmark im only running 110 degrees F so it's not like the thing is getting super hot at all if it was like 130 I would have some concern.
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old 17th May, 2003, 09:52 AM
Elisha's Avatar
Member
 
Join Date: April 2003
Posts: 34

trust me 5 degrees is a big difference when it comes to overclocking.
__________________
AXP 2100+ AUIHB (0304) @10x233 FSB
2330mhz@1.7v
Epox 8RDA+ A1/C1
2x256 Corsair XMS3500
Vantec Aeroflow
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old 17th May, 2003, 09:55 AM
Member
 
Join Date: December 2002
Posts: 42

do you think part of the problem might be that it's a 0312 and they don't overclock as well as some of the 0310 or 0308???
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old 17th May, 2003, 10:25 AM
jcool
Guest
 
Posts: n/a

My DLT used to need 1,9V for 2,3Ghz and it was watercooled damn well.
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old 17th May, 2003, 10:30 AM
perc
Guest
 
Posts: n/a

well i would have to say that your cpu is a good ocer and all that but if your using that much voltage just to get 2200 mhz out of it? then id have to say you probly would of done a little better withh a 0310 and down but dont feel bad man cause you did good and i bet if you play with it a little you may even squeeze a little more mhz out of it? see i have the 0309 XPMW DLT3C 1700 and i can run 12.5x166 @ 2088 1.5v and 11.5x200@ 2300 1.7v wich is alot less volts than what your having to use.. id just have to say that the newer steppings are going to start getting harder to oc wich is what ive allways expected? From what ive been reading the 0310 and down are the ones to look for. now i wouldnt worry too much cause you were damm lucky to find one in the first place cause everyone ive talked to has been striking out finding the 1700 DLT3C they are either soldout or the steppings they have left are no good? well man good luck and i hope you mange to get your temps down and shave off some of the voltage you having to use?

later guys.. perc.
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old 17th May, 2003, 10:43 AM
Member
 
Join Date: December 2002
Posts: 42

well here is the beautiful thing about it there were two cpu left a 0310 and a 0312 I took the 12 but reserved the 10 for 24 hours I will go and get that tomorrow and see if that oc's better :-) I will update when I get the answer
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #19 (permalink)  
Old 18th May, 2003, 07:27 AM
Member
 
Join Date: December 2002
Posts: 42

Okay so here is the deal I picked up a 0310 and I have been having much better luck. I can get up to 2400mhz 200 x 11.5 with 1.7 Vcore. Now here is what's weird I did a 3dmark it passed with no problem I had a little over a 16,000 now for some reason I try another 3dmark and it locks up. Shut the machine dwn to make sure it was not a heat issue and same thing it rebooted itself halfway through so Im going to try a little more voltage to the chip possibly and see what I can do to get this think stable. Can anyone give me a good stress test to ensure stablility. I don't want to say my machine is stable just because I can pull a 3dmark on it. Tks Also temp is around 120 F
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #20 (permalink)  
Old 18th May, 2003, 07:40 AM
Blackmyst's Avatar
Member
 
Join Date: February 2003
Location: Herts, UK
Posts: 268

I current have a XP1800 (refer to "Project PC" for steppings.

Currently at 1.7v core, 12.5x180 = 2260mhz. I've had this running up to nearly 2500mhz @ 1.85v, but had to run RAM out-of-sync to achieve this unfortunately.

I use an SLK-900 with Vantec 92mm Tornado (with free earplugs) and it (at 2500mhz) never went over 48oC. Does that sound right?
__________________

EPOX 8RDA3+ rev1.1, 3526 bios, vantec iceberg (nb), zalman gold (sb), heatsinks/fan (mosfets)
XP1800+ slk900 w/92mm vantec tornado, 11 x 215mhz, 1.85v
TWINMOS PC3200 ch-5 winbond, 2x256mb, dc-sync, 8,3,3,2.0, 2.63v
RADEON 9800 PRO 128mb, 380/680
WD RAPTORS 2x36gb, sata raid0
CHEIFTEC CASE enermax 550w
XP HOME sp1, nforce v3.13, catalyst v4.3
3DMARK2001se 18120

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question Concerning EP-8RDA Tyler EPoX MotherBoards 6 15th April, 2006 11:43 PM
8rda+ ram question sacrum EPoX MotherBoards 4 19th October, 2003 04:48 PM
Question about 8RDA+ vdd mod Reejoc EPoX MotherBoards 1 18th June, 2003 07:11 PM
Question about vdd mod on 8RDA+?? AMD Fanatic EPoX MotherBoards 7 7th February, 2003 04:19 AM
8rda question water_cooler20 EPoX MotherBoards 2 22nd December, 2002 09:38 PM


All times are GMT +1. The time now is 08:51 AM.


Copyright ©2001 - 2010, AOA Forums
Don't Click Here Don't Click Here Either

Search Engine Friendly URLs by vBSEO 3.3.0