|
EPoX MotherBoards EPoX Intel and AMD Motherboards. |
![]() |
| LinkBack | Thread Tools | Rate Thread |
| |||
![]() I have a problem with 4PCA3+ rev1.1 using my new P4 3.4C stock vcore is 1.55v Problem at stock speeds: 1. intermittently /sometimes when i reboot from WinXP SP1 with latest updates - i will be greeted with bios checksum error with post diagnostic code: 16 - Initial Early_Init_Onboard_Generator Switch. There's no probs installing winxp pro sp1, memtest'ing for several hours and priming for 10hrs but only when i reboot ??? 4pca3+ rev1.1 with 03/07/2003 bios with 1.475v vcore in bios which is 1.55v real at idle and jumps around between 1.48-1.58v. Besides 1.45v vcore giving me 1.68v idle vcore, all other bios vcore options are <1.375-1.475v while P4 3.4C stock vcore is 1.55v. Latest bios 09/02/2004 and last couple all only give me 1.6v max vcore option in bios which is 1.52v vcore. http://www.fileshosts.com/pentium4/D.../prime95_1.jpg But still reboot and bios checksum 2. i've tried the last 5 4pca3+ bios releases, and all but one bios release, gives my rev1.1 board max 1.6v vcore which according to bios is only 1.52v idle vcore really only 03/07/2003 bios allows me to use 1.45v vcore in bios = 1.55v real and 1.475v in bios gives me 1.68v real vcore all other bios options including default/AUTO give me vcore between 1.375-1.475v real so question is does 4PCA3+ rev1.1 support P4 3.4C 800FSB northwood cpu ? CPUZ reports the cpu speed and stuff fine my system is P4 3.4C 800FSB L344B046 Malay 4PCA3+ rev1.1 with MCX478-V heatsink 2x 512MB XMS3500C2 128MB Gigacube 9600PRO VIVO 120GB WD 1200JB on IDE1 550W Antec TrueControl PSU
__________________ Epox 4PCA3+ rev 1.1 Shuttle AN50R Abit AI7 Asus P4C800-E rev 1.02 Albatron PX865PE PRO2 1.02 beta bios Abit IC7 15 bios 30GB DDRAM Last edited by eva2000; 4th March, 2004 at 11:55 AM. |
| |||
hmmm Epox KB says max is 3.0C ftp://ftp.epox.com/downloads/FAQ/CPU...n04-2-p4-e.pdf as of Jan 20, 2004 ![]()
__________________ Epox 4PCA3+ rev 1.1 Shuttle AN50R Abit AI7 Asus P4C800-E rev 1.02 Albatron PX865PE PRO2 1.02 beta bios Abit IC7 15 bios 30GB DDRAM |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Rate This Thread | |
| |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
4PCA3+ Rev1.1 + P4 3.2E | DJD | EPoX MotherBoards | 0 | 7th May, 2004 11:26 AM |
do 4PDA2+, 4PCA3+ support Prescott? | frogblast | EPoX MotherBoards | 8 | 29th February, 2004 06:53 AM |
4pca3+ rev1.2 when using sata raid | fraudulent03 | EPoX MotherBoards | 0 | 8th February, 2004 12:29 PM |
HELP! epox 4pca3+ rev1.0 & 4pca3+ rev2.0 | crazyfied | EPoX MotherBoards | 8 | 17th September, 2003 02:17 AM |
4PCA3+ rev1.1 issues help! | eva2000 | EPoX MotherBoards | 15 | 12th August, 2003 12:56 AM |