| |||||||
| EPoX MotherBoards EPoX Intel and AMD Motherboards. |
 |
| | LinkBack | Thread Tools | Rate Thread |
17th January, 2002, 04:28 PM
| ||||
| ||||
| fta Speedy-J.. Your Overclock.. Speedy thats what i call a clocked Athlon..Couple of Questions for ya..  What V Core mod u using? What cooling? Thanks..       |
|
17th January, 2002, 04:55 PM
| ||||
| ||||
 Hi DazzleW I'm using a 220k resistor and a 70k resistor to get some stable Vcore. And the cooling i use is a Swiftech MCW waterblock A well take a look inside my case . http://members.home.nl/ethanol/Foto%2023.jpg Greetz !
__________________ -=Specs=- remember... if the world wouldn't suck, we all would fall off Last edited by Speedy-J; 17th January, 2002 at 04:58 PM. |
|
17th January, 2002, 06:01 PM
| ||||
| ||||
| Please do detail the specifics of the modification using the two resistors.
__________________ If you need EPoX BIOS eeproms in the UK, goto http://www.epox.org..................... |
|
17th January, 2002, 06:10 PM
| ||||
| ||||
| I setup the two resistors in serial ,so the VCore is in the bios with some smaller steps . This increase overall stability of the Vcore . I only solder pin 2 ,and the other side of the resistor is grounded to my case. I notice that the regulator gets very hot when it goes up to 2.05Vcore and beyond. So i made a small heatsink and fan to cool down the regulator a little . Also the mosfets are with heatsink now ,i know the "over voltage protection" But this al increase my success to overclocking the 8KHA board over 166fsb and beyond !!
__________________ -=Specs=- remember... if the world wouldn't suck, we all would fall off |
|
17th January, 2002, 08:34 PM
| ||||
| ||||
| So, what Vcore r u using Speedy-J? With the 220k 1/4 resistor, i can only run upto 1.98vcore. Anymore and i hit the overcurrent protection.  |
|
17th January, 2002, 08:42 PM
| ||||
| ||||
| i'm using now 2.03Vcore ,but i can go up to 2.08 without the reboots. This depends off the room temperature here. With the 220 resistor only i can hit 2.20Vcore but unstable.
__________________ -=Specs=- remember... if the world wouldn't suck, we all would fall off |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Rate This Thread | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| overclock | colflo | AMD Motherboards & CPUs | 1 | 7th January, 2007 09:14 PM |
| You know you overclock too much when... | cadaveca | The Chop Shop | 6 | 15th April, 2006 05:27 AM |
| If I were to overclock... | graz | EPoX MotherBoards | 3 | 19th November, 2004 04:08 AM |
| First overclock | Devilfish | Graphics and Sound cards; Speakers and other Peripherals | 11 | 4th November, 2004 12:58 AM |
| K6-2 Overclock | Mad old tory | AMD Motherboards & CPUs | 11 | 28th June, 2003 07:17 PM |
