AOA Forums AOA Forums AOA Forums Folding For Team 45 AOA Files Home Front Page Become an AOA Subscriber! UserCP Calendar Memberlist FAQ Search Forum Home

Go Back   AOA Forums > Hardware > EPoX MotherBoards

EPoX MotherBoards EPoX Intel and AMD Motherboards.

LinkBack Thread Tools Rate Thread
  #1 (permalink)  
Old 10th August, 2004, 12:07 PM
Join Date: August 2004
Posts: 4

Anyone managed to get a KyroII card work with nForce2 boards like EP-8RDAi?


There seems to be a problem running a KyroII card (Prophet 4500) on a nForce2 board like the EP-8RDAi.
Seems the KyroII works with 1.5V on these MoBos as it takes the VDD for the output drivers from the AGP slot and so matches the voltages automaticly.
Only the MoBo does not reckognice it as a AGP4X card as the TYPEDET# signal is not pulled to ground at the Hercules 4500 because they wanted to be compatible with the older AGPX2 or X1 slots.
Seems one can add one 0 ohm resistor or a solder bridge and it should work (also called AGP4X-Mod).
This seems to worl on 8K3A+ rev1.0 as K6-III stated once.
Did anyone try this on a EP-8RD.. board?
Best Regards
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 10th August, 2004, 11:30 PM
jnansley's Avatar
Join Date: May 2004
Posts: 888

I don't think I've ever seen a KyroII card :/
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
ASUS AI NOS ? DOES IT WORK ON NEW 3200 CROSSFIRE BOARDS noob at o.c any tips please gordon996 AMD Motherboards & CPUs 5 23rd March, 2006 11:18 PM
nForce2 boards and south bridge heat Gizmo AMD Motherboards & CPUs 24 13th March, 2004 05:09 AM
nForce2 boards with IDE RAID & differences Pleasure AMD Motherboards & CPUs 2 18th September, 2003 05:55 PM
memory interleave on nforce2 boards bmorrisj AMD Motherboards & CPUs 2 7th August, 2003 12:31 AM
When are the nForce2 boards coming??? JayJay AMD Motherboards & CPUs 5 28th August, 2002 04:08 AM

All times are GMT +1. The time now is 03:13 AM.

Copyright ©2001 - 2010, AOA Forums
Don't Click Here Don't Click Here Either

Search Engine Friendly URLs by vBSEO 3.3.0