9nda3j

[gedon]

Hi everybody,
9nda3 boards well known here. Is the 9nda3j a good board?stable?good overclocking?

cpu maybe a 3000+ Winchester, TCCD RAM

What is about max HTLink and Ram clock?

Any undervolting problems known as 8kda3?

[SPQQKY]

With my 9NDA3J, it was a very stable board and easy overclocker. Get some really good RAM capable of high clocks at low voltages (GSkill pc4400 - pc4800) as the board only supports 2.8 vdimm and mine undervolted by about .05 volts or 2.75 volts max. Max HTT is 400 and of course with DRAM set to 200, you could (theoretically) bring your RAM to DDR800 (if you manage this, please call Guiness and then me, I will buy the memory from you. ).

[gedon]

Thx SPQQKY, what CPU do you have, a Newcastle or Winchester?

[SPQQKY]

Winchester CBBID 0451MPM

My 24/7 setting.

[S@iN oNeZ!!]

Also wanna let you know that I own such a 9NDA3j and I am very pleased with it.. Keep in mind that low vdimm as well as the only few bios RAMsettings, but there you got A64tweaker (beta) for.

Mine is a CBBHD 0450 SPBW and have the exact same 24/4 oc as Spqqky has.
260x10 htmp3x mem 2x512mb gskill pc4400LE 260MHz T1 1:1 2.5-3-3-6

pifast stable at 269x10, suicidalscreens at 275-280x10 (have not yet tested the 9x cpu multi but timings for mem will not be as tight, so probably not as interesting)

http://img206.exs.cx/img206/8568/my247oc5cr.th.png

Spqqky, you also have rev. 2.1? did you update your bios, and did it have some positive effects!?