AOA Forums

AOA Forums (http://www.aoaforums.com/forum/)
-   EPoX MotherBoards (http://www.aoaforums.com/forum/27-epox-motherboards/)
-   -   4PEA+ + 2 x 512MB XMS3200C2/XMS3500 (http://www.aoaforums.com/forum/epox-motherboards/13214-4pea-2-x-512mb-xms3200c2-xms3500.html)

eva2000 9th January, 2003 06:04 PM

4PEA+ + 2 x 512MB XMS3200C2/XMS3500
 
Hi i'm thinking of getting a 4PEA+ board specifically with the intention of running either:

2 x 512mb xms3200c2
or
2 x 512mb xms3500

sticks of memory @ at least >200mhz at 2-3-3-6 or 2.5-3-3-6

so

1. is the new bios with 3:4 ratio actually working now ?
2. anyone have 2 x 512mb sticks running on their 4PEA+ ?
3. can i run 4 independent drives on the 2 IDE and 2 HPT372 channels ?

my P4PE has 2 x 512mb xms3200c2@201mhz 2-3-3-6 rock stable 24hrs memtest and 36hrs prime95 passed

wondering if the 4PEA+ would do the same :)


http://www.fileshosts.com/p4pe/2x512...em-2-3-3-6.jpg

http://www.fileshosts.com/p4pe/2x512...1/cpuz-mem.jpg


thanks :)

1meangti 10th January, 2003 01:17 AM

Re: 4PEA+ + 2 x 512MB XMS3200C2/XMS3500
 
Quote:

Originally posted by eva2000
Hi i'm thinking of getting a 4PEA+ board specifically with the intention of running either:

2 x 512mb xms3200c2
or
2 x 512mb xms3500

sticks of memory @ at least >200mhz at 2-3-3-6 or 2.5-3-3-6

so

1. is the new bios with 3:4 ratio actually working now ?
2. anyone have 2 x 512mb sticks running on their 4PEA+ ?
3. can i run 4 independent drives on the 2 IDE and 2 HPT372 channels ?

my P4PE has 2 x 512mb xms3200c2@201mhz 2-3-3-6 rock stable 24hrs memtest and 36hrs prime95 passed

wondering if the 4PEA+ would do the same :)


http://www.fileshosts.com/p4pe/2x512...em-2-3-3-6.jpg

http://www.fileshosts.com/p4pe/2x512...1/cpuz-mem.jpg


thanks :)

I would go with one stick of XMS512 3500

I think it is time for Epox to take care of the people that have this board and get a bios that will give us the 3:4 divider without having to mob the motherboard to get it.

noxarin 10th January, 2003 04:37 AM

re
 
My board has the multiplier 3:4 ratio and the 4:5 ratio selectable in the bios. I think it's a newer one but i've had it for quite a while now, I think you'd have a good chance of getting one of these newer boards if you were to purchase one today.

Also can I ask, why would you buy a 4PEA+ when you already have an Asus P4PE ? These boards are very similar. I don't really see a point in changing.

Sorry to say I can't really help you on this I have a 2.4B B0 processor that doesn't seem to be able to overclock very far. It's summer here so hot days you never know if you will crash. Right now I have it running at 151 FSB or 2.71 GhZ. Vcore at 1.65V, AGP voltage at 1.6V, my ram is running at DDR 402 it's kingmax ddr400 I got the vdimm at 2.7V. I got 2 x 256 sticks I put one in slot1 and the other in slot3 since I remember hearing that these are the fastest slots. I run it at timing 2.5-5-3-3.

eva2000 10th January, 2003 06:54 AM

Re: re
 
Quote:

Originally posted by noxarin
My board has the multiplier 3:4 ratio and the 4:5 ratio selectable in the bios. I think it's a newer one but i've had it for quite a while now, I think you'd have a good chance of getting one of these newer boards if you were to purchase one today.

Also can I ask, why would you buy a 4PEA+ when you already have an Asus P4PE ? These boards are very similar. I don't really see a point in changing.

Sorry to say I can't really help you on this I have a 2.4B B0 processor that doesn't seem to be able to overclock very far. It's summer here so hot days you never know if you will crash. Right now I have it running at 151 FSB or 2.71 GhZ. Vcore at 1.65V, AGP voltage at 1.6V, my ram is running at DDR 402 it's kingmax ddr400 I got the vdimm at 2.7V. I got 2 x 256 sticks I put one in slot1 and the other in slot3 since I remember hearing that these are the fastest slots. I run it at timing 2.5-5-3-3.

i have 4 p4 systems,

2 x p4b533
1 x p4pe
1 8srx

and spare bd7ii

but thinking of changing one of my p4b533's to 4pea+ and i need to be able to run 2 x 512mb xms3200/xms3500 @200mhz 2-3-3-6 at least

eva2000 11th January, 2003 07:30 AM

so no one has the 4pea+ using 2 x 512mb sticks of memory ?

PSUGorilla 11th January, 2003 05:10 PM

My 4PEA+ runs fine with 2X512 sticks of Corsair XMS3200. I had to mod my board to get the 3:4 divider, but I run my P4 3.06 @ 3.31 (144 FSB) at stock voltage. I have my memory running stable at 2-5-3-2. I had to bump the memory voltage up to 2.7 to get stability with both sticks though.

eva2000 12th January, 2003 02:26 AM

Quote:

Originally posted by PSUGorilla
My 4PEA+ runs fine with 2X512 sticks of Corsair XMS3200. I had to mod my board to get the 3:4 divider, but I run my P4 3.06 @ 3.31 (144 FSB) at stock voltage. I have my memory running stable at 2-5-3-2. I had to bump the memory voltage up to 2.7 to get stability with both sticks though.
thanks PSUGorilla :)

so you have 2 x 512mb xms3200 @192mhz right ?


All times are GMT +1. The time now is 12:59 AM.


Copyright ©2001 - 2010, AOA Forums


Search Engine Friendly URLs by vBSEO 3.3.0