AOA Forums

AOA Forums (http://www.aoaforums.com/forum/)
-   EPoX MotherBoards (http://www.aoaforums.com/forum/27-epox-motherboards/)
-   -   8rda+ (rev1.1) FSB 217 stable :) (http://www.aoaforums.com/forum/epox-motherboards/22040-8rda-rev1-1-fsb-217-stable.html)

maximka 4th December, 2003 10:00 PM

8rda+ (rev1.1) FSB 217 stable :)
 
Hi everyone!!!!!!
I am so happy!!!!!!!! Today i bought new memory (Kingston HyperX 3500 256mb).
Kingston is the best memory in the world!!!!! (maybe Corsair too) :)

I was using Kingmax DDR 400 512mb memory stick before and it only could run on 133Mhz(!!!!!!!!!) stable.(Ofcourse i tried everything to push it a bit).
I hate ****ing Kingmax!!!

But everything changed with HyperX !!!!!!!!!
Now i have :
1. 8rda+ (rev.1.1) c18d
2. 256mb Kingston HyperX DDR434 (100% synch. with fsb)
3. AMD Athlon XP 2000+(thoroughbred B) @ 217x10 = AthlonXP 2600+
4. Geforce 4 MX 440 SE 64mb (315/411)
.....
Prime95 3 hours STABLE!!!!!! MEMtest 600% STABLE!!!!! 3DMark 2001SE Demo Stable 2 hours!!!!!

Vcore 1.80, Vdd 1.6, Vdimm 2.6 !!!!!!!!!!!!!!!

AND ABSOLUTLY NO ADDITIONAL COOLING!!!!!!!!!!!!!!!!!!!!!! (exept on cpu, vga and one 8x8 fan in chassis)!!!

Isn't it perfect???!!!!! KINGSTON IS THE KING!!!!!!!!!!!!!!!!!!!!
I recomend on every epox mobo!!!!!!!!!!

bye

hchu 4th December, 2003 11:55 PM

you've probably got winbond bh-5, only they do well.

SPQQKY 5th December, 2003 01:21 AM

I have got 2 x 256MB Kingston HyperX pc3200 in dual channel at 225MHz 6-3-3-2 and she hasn't faultered a bit.

Robin B 5th December, 2003 07:14 PM

1 Attachment(s)
My rev.1 with ch5 chips 2,7 volt.(2x256Mb Twinmos)

jcool 6th December, 2003 01:16 AM

Running 227 DC with 2x256megs of Corsair XMS3500, 2-2-2-11 timings, additional cooling, prime stable =)
Those BH5 rock :thumbsup:

Veky 6th December, 2003 02:06 AM

A cookie for you!

Chewie 6th December, 2003 05:31 AM

Running 220Mhz with a 8RDA+ rev1.1 and 2x512Mo OCZ PC3500EL Platinium :thumbsup:

maximka 6th December, 2003 02:35 PM

The purpose of this thread is too show how happy you are with your EPOX mobo!!!

Everyone is posting a lot of problems they have. But why cannot we just say few words about our satisfaction with THIS GREAT MOTHERBOARDS!!!!!!?????

bye :-)

Daniel ~ 6th December, 2003 04:49 PM

Have three of them running 24/7 8K5A+2 and +3 and a 8RDA+

Drisler 6th December, 2003 05:38 PM

Quote:

Originally Posted by maximka
Everyone is posting a lot of problems they have. But why cannot we just say few words about our satisfaction with THIS GREAT MOTHERBOARDS!!!!!!?????

bye :-)

Well that's what forums are for.
People don't usually post when they have no problems :D

SteveI 6th December, 2003 05:50 PM

Quote:

Originally Posted by maximka
....3DMark 2001SE Demo Stable 2 hours!!!!!....

I just thought I should let you know. The Demo does not stress components like the test itself. You should try looping the test itself to see if it gives you the same results.

BTW, nice o/c. :thumbsup:

Daniel ~ 6th December, 2003 06:04 PM

Quote:

Originally Posted by Drisler
Well that's what forums are for.
People don't usually post when they have no problems :D

And for me that's a problem! ":O}

TonyCarr 13th December, 2003 07:39 PM

Many have harsh words for Kingston memory so I was always afraid to try it . However after reading the post here I decided to try HyperX 3200 512M kit . Works great ( dual channel 256M X 2 kit ) , most any numbers , right now @ 6-2-2-2 ( 338 fsb ) . @ 200 fsb , I've tried , 7-3-3-2 or 11-3-3-2 , so far very good .
Has Kingston improved over the years or has system compatability improved or combo of both ?

Woof! 14th December, 2003 03:03 PM

Nice one maximka!

I have a 512MB KingMax SuperRam (DDR333, using BH-6 chips) module here that I use on my new 8RDA3I at 221 mhz 2-2-2-6 (2.9v).

I'd say Winbond BH-series memory rocks!


All times are GMT +1. The time now is 09:08 PM.


Copyright ©2001 - 2010, AOA Forums


Search Engine Friendly URLs by vBSEO 3.3.0