AOA Forums AOA Forums AOA Forums Folding For Team 45 AOA Files Home Front Page Become an AOA Subscriber! UserCP Calendar Memberlist FAQ Search Forum Home


Go Back   AOA Forums > Hardware > Hardware Hacking

Hardware Hacking The hammer and tongs school of Overclocking. (NOT for the beginner and you assume all risks)


Reply
 
LinkBack Thread Tools Rate Thread
  #1 (permalink)  
Old 16th August, 2003, 08:20 PM
Member
 
Join Date: August 2003
Posts: 4

Good Overclock ?

I'm a bit of a noob when it comes to O\Cing can anyone comment on my overclock
Xp1800 running at 200*10
2*512MB sticks of twinmos 2700 RAM running at 400
All on an Abit NF&-S rev 2 board
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 17th August, 2003, 12:58 AM
Lazgoat's Avatar
Member/Contributer
 
Join Date: October 2002
Location: UK
Posts: 1,868

Thats not bad at all. Post some benchies

Laz.
__________________
DFI SLi-D, Opteron 144 @ 2.8Ghz, 4x512MB PDP XBLK, 160GB WD Caviar SE, Benq 1620DW DVD-RW, X1800XT 256MB,Custom WC.


AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 17th August, 2003, 12:39 PM
Member
 
Join Date: August 2003
Posts: 4

Sorry for the delay

sandra
CPU Arith 8336/3350
CPU Multi Media 12342/13171
mem Bandwidth 3055/2857

PC Mark 02

CPU 6850
Memory 5195
HDD 910
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 17th August, 2003, 04:10 PM
Phat Pat's Avatar
Phat Spammer
 
Join Date: July 2002
Location: /home/pat
Posts: 1,432
Send a message via AIM to Phat Pat

any overclock is a good overclock. but that one looks quite good
__________________
God's got this all wrong. We are not special. We are not crap or trash either. We just are, and what happens just happens.
And God says, "No, that's not right."
Yeah. Well. Whatever. You can't teach God anything. -Tyler Durden

AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 17th August, 2003, 05:51 PM
Daniel ~'s Avatar
Chief BBS Administrator
 
Join Date: September 2001
Location: Seattle Wa.
Posts: 45,606

Well done I'd say!!
__________________
"Though all men live in ignorance before mystery,
they need not live in darkness...
Justice is foundation and Mercy ETERNAL
."
DKE

"All that we do is touched by Ocean
Yet we remain on the shore of what we know."
Richard Wilbur

[img]/forum/attachments/random-nonsense/16515-sigs-dan_drag.jpg[/img]
Subscribers! Ask Pitch about a Custom Sig Graphic

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 18th August, 2003, 06:01 PM
Soul99's Avatar
Member
 
Join Date: December 2002
Location: UK Portsmouth
Posts: 306
Send a message via ICQ to Soul99

I take it thats a .13 core

If it is the what is the stepping on the cpu?
what is your cooling?
what are your voltages and temps?

If its a good core it could be capable of 2.3 - 2.4 on good air cooling with a little extra volts.

If its a .18 core thats damn good.
__________________
XP 2500 @ 2400mhz 1.76v Idle -5c, Load 9 c | Abit NF7-s V2.0 @ 218 FSB
Adata PC3200 2 x 512meg @ 218 mhz | R9700 Pro @ 415Mhz core, 355Mhz mem
Cooling is custom built TEC /Water/ Freon setup | Vapo Mk1 performance est.
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 18th August, 2003, 06:20 PM
Member
 
Join Date: August 2003
Posts: 4

I didn't make a note of the stepping before it went into the rig so I can't answer but i'm using an SLK 900 with a 92mm emermax adjustable fan,
chieftec dragon case with 5 80mm fans (3 in and 2 out) and an enermax 550watt PSU

my temps are 42 idle and 48 under load
voltages are 1.75 core and 2.8 vdimm
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 19th August, 2003, 09:18 AM
Soul99's Avatar
Member
 
Join Date: December 2002
Location: UK Portsmouth
Posts: 306
Send a message via ICQ to Soul99

your temps are holding out ok for this time of year, maybe bumb the voltage to 1.8v and go for a few hundred mhz?
it should be able to handle it.
__________________
XP 2500 @ 2400mhz 1.76v Idle -5c, Load 9 c | Abit NF7-s V2.0 @ 218 FSB
Adata PC3200 2 x 512meg @ 218 mhz | R9700 Pro @ 415Mhz core, 355Mhz mem
Cooling is custom built TEC /Water/ Freon setup | Vapo Mk1 performance est.
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 19th August, 2003, 10:21 AM
Member
 
Join Date: August 2003
Posts: 4

I've tried to bump it up a bit further but i can't boot into wimdows. I don't know if it is the memory thats holding me back it's twinmos PC2700
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 19th August, 2003, 10:54 AM
Soul99's Avatar
Member
 
Join Date: December 2002
Location: UK Portsmouth
Posts: 306
Send a message via ICQ to Soul99

then raise the multiplyer, you should find that that motherboard unlocks the chip from 5.5 through to 12.5
just go up to 10.5 * 200 adn test for stability.
__________________
XP 2500 @ 2400mhz 1.76v Idle -5c, Load 9 c | Abit NF7-s V2.0 @ 218 FSB
Adata PC3200 2 x 512meg @ 218 mhz | R9700 Pro @ 415Mhz core, 355Mhz mem
Cooling is custom built TEC /Water/ Freon setup | Vapo Mk1 performance est.
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plz plz plz help me overclock Matthew AMD Motherboards & CPUs 16 22nd December, 2003 05:11 PM
A good vocabulary is a good thing. mookydooky Mookydooky's Just for laughs! 0 16th February, 2003 11:19 PM
8RDA+: Mosfet Cooling for Good FSB Overclock? Clocker EPoX MotherBoards 7 25th January, 2003 08:41 AM
A good laugh at a Misfortune of a good friend! The Spyder AMD Motherboards & CPUs 11 22nd March, 2002 01:05 AM
Good Day, Good Night, and if I don't see you, Good Evening Pinky Random Nonsense! 5 2nd November, 2001 10:41 PM


All times are GMT +1. The time now is 06:05 AM.


Copyright ©2001 - 2010, AOA Forums
Don't Click Here Don't Click Here Either

Search Engine Friendly URLs by vBSEO 3.3.0