| |||||||
| Register | FAQ | Members List | Calendar | Arcade | Search | Today's Posts | Mark Forums Read |
| Intel Motherboards & CPUs Questions or comments on INTEL products? |
 |
| | LinkBack | Thread Tools | Rate Thread |
28th April, 2008, 11:50 AM
| |||
| |||
| Question for the overclockers Ok, no rants i know its an old board but, is it possible to only get a 6mhz overclock on a P4S800d-x with a P4 3.06? Other higher settings either don't load at all or return errors with prime95. I've tried seting the ram to its lowest setting then working the fsb bus higher but it doesnt matter. Locks up during XP boot anything over 150mhz. Is this normal for this board? There are no voltage settings in the BIOS so i thought maybe thats all i can go?  Oh also my ram is kingston hyper-x pc3200 2gb dual channel at 2-3-2-6.Thanks!
__________________ Last edited by Scoop78 : 28th April, 2008 at 11:52 AM.      |
|
30th April, 2008, 10:51 AM
| ||||
| ||||
 "There are no voltage settings in the BIOS so i thought maybe thats all i can go?" Yea IMO, I'd say that pretty much says it all, although I was able to overclock my old P4 2.4Ghz to 2.66Ghz (CPUFSB) without a vcore voltage increase, but I guess this depends on the processor as to how much it will overclock with "stock" voltage. You might need to disable some setting(s) in the bios that might be interfering with the overclock... Or, maybe there's a vmod you can do to the board to increase the vcore with a pot...hmm Need input from some of our "more knowledgeable" OCer's here other than me... But I thought I'd at least acknowledge your post to let you know that someone took the time to read it...  Review at Newegg on this board. ASUS P4S800D-X 478 SiS 655FX ATX Intel Motherboard Deactivated Item Bad OC abilities Reviewed By: Gamer4u on 1/7/2007 Tech Level: high - Ownership: more than 1 year Pros: Best motherboard I could find for 478 prescotts. AGP slot and 4 DDR slots. Cons: terrible OCing abilities. No voltage adjustments. Other Thoughts: just get a 775 and e6400 and OC it w/ H20 cooling.
__________________ Intel Core 2 Duo E6700 @ 3.50GHz / Zalman CPNS9700 Intel D975XBX2 Bad Axe 2 / FSB 1400 2x1GB Corsair XMS2 TWIN2X2048-6400C4 (4-4-4-12) @ 875Mhz Seagate Barracuda SATAII 2 x 320GB EVGA NVIDIA GeForce 8800 GTS 320mb/320bit (648/1512/2052) 82.2Gbs using EVGA Precision 1.3.2 PhysX Enabled: Geforce v177.98 drivers / 3DMark06 12162 Acer X222W HD 22" LCD 1000:1 / 5ms Thermaltake ToughPower 750w / 85% efficiency / SLI-Crossfire ready XP PRO SP3 / Vista Ultimate SP1 (Both tweaked) Last edited by MUff1N : 30th April, 2008 at 11:10 AM. |
|
30th April, 2008, 11:47 AM
| |||
| |||
| Lol thanks MUff1N for at least finding some info for me. I kinda figured that, there is a VID cmos setting i guess for voltage but its at the max. Well i guess i'll just have to save up for a new PC!
__________________ |
|
30th April, 2008, 12:17 PM
| ||||
| ||||
| BTW. welcome to AOA Scoop78. Too bad the board will not do more.
__________________ "FEAR NOT" Isaiah 41:10 eVga 680i SLI 122-CK-NF68-A1 E6400 @ 3.3 @ 1.25V 2 x 8800 GTS SLI 3 x 21" Sony Trinitron Tuniq 3 modified case. PSU - Tuniq 950 watt Miniplant review   |
|
30th April, 2008, 12:20 PM
| ||||
| ||||
| Yea, I've been there with my 7 yr OLD system with a 478 socket mobo with no voltage control or any adjustments really for any overclocking. That's why I use CPUFSB to OC my system...it was the only way I could and I was limited on the OC because I couldn't raise any voltages on anything...  Even still, getting it to run at 2.68 @ stock vcore did help performance some. CPUFSB Podien's Shareware
__________________ Intel Core 2 Duo E6700 @ 3.50GHz / Zalman CPNS9700 Intel D975XBX2 Bad Axe 2 / FSB 1400 2x1GB Corsair XMS2 TWIN2X2048-6400C4 (4-4-4-12) @ 875Mhz Seagate Barracuda SATAII 2 x 320GB EVGA NVIDIA GeForce 8800 GTS 320mb/320bit (648/1512/2052) 82.2Gbs using EVGA Precision 1.3.2 PhysX Enabled: Geforce v177.98 drivers / 3DMark06 12162 Acer X222W HD 22" LCD 1000:1 / 5ms Thermaltake ToughPower 750w / 85% efficiency / SLI-Crossfire ready XP PRO SP3 / Vista Ultimate SP1 (Both tweaked) Last edited by MUff1N : 30th April, 2008 at 12:23 PM. |
|
30th April, 2008, 01:01 PM
| |||
| |||
| Thanks i'll give that program a try also, i'm assuming setting the bios settings back to auto then using that then? Umm also, is there a freeware version?
__________________ Last edited by Scoop78 : 30th April, 2008 at 01:07 PM. |
|
30th April, 2008, 02:19 PM
| ||||
| ||||
| Quote:
Click PLL find on the lefthand side of this page. Podien's Shareware Yea...here it is.  |MG| CPUFSB 2.2.18
__________________ Intel Core 2 Duo E6700 @ 3.50GHz / Zalman CPNS9700 Intel D975XBX2 Bad Axe 2 / FSB 1400 2x1GB Corsair XMS2 TWIN2X2048-6400C4 (4-4-4-12) @ 875Mhz Seagate Barracuda SATAII 2 x 320GB EVGA NVIDIA GeForce 8800 GTS 320mb/320bit (648/1512/2052) 82.2Gbs using EVGA Precision 1.3.2 PhysX Enabled: Geforce v177.98 drivers / 3DMark06 12162 Acer X222W HD 22" LCD 1000:1 / 5ms Thermaltake ToughPower 750w / 85% efficiency / SLI-Crossfire ready XP PRO SP3 / Vista Ultimate SP1 (Both tweaked) Last edited by MUff1N : 30th April, 2008 at 02:23 PM. |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Rate This Thread | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Overclockers.co.uk | MercutioUK | Reader's Retailer Ratings & Commentaries | 46 | 2nd May, 2007 09:24 AM |
| www.overclockers.co.uk | YadaMaker | Online Deals, and Steals | 3 | 7th April, 2007 11:04 AM |
| Overclockers.com | robbie | Random Nonsense! | 7 | 27th August, 2002 04:57 AM |
| Are there any overclockers in here? | akaBruno | Random Nonsense! | 21 | 10th March, 2002 01:20 PM |
| For Overclockers | CNUCompGuy | EPoX MotherBoards | 10 | 31st October, 2001 11:20 AM |
