Gizmo's been hard at work again, this time with a unusual window mod. I'll let Gizmo explain in his own words:

First off, I had Judy split the image into a foreground and background, then I had the great guys at www.koolpcmods.com make me a laser etching of both the front and back on separate plates.

Then, I took a piece of 1/4" plexi about 1/2" wide and 2" long and glued one small piece to each edge of the back plate, and then glued on the front plate (after making sure everything was clean, of course), using plastic cement. Once that set up, I drilled a small hole in each side just large enough for a high-brightness blue LED........

Read it here

Recommend on: