View Single Post
  #1 (permalink)  
Old 9th May, 2003, 12:20 AM
MasterAtArms's Avatar
MasterAtArms MasterAtArms is offline
Join Date: January 2003
Location: Kent, England
Posts: 700

Unhappy Vdd mod attempt and soldering pins together!

I attempted the vdd mod and had a blob joining to pins. The 3037 chip is the vdd chip and you join pin 1 and 4 with a resistor. I soldered a wire on pin 1 but when I tried the same for pin 4 I joined pin 3 & 4. I messed around using a solder sucker but pin 3 & 4 are still shorted from my multi meter readout. Can anyone test their board to see if they are meant to be joined or would someone like Aieden know already? Plz help.
My regards and Specs
Reply With Quote