View Single Post
  #3 (permalink)  
Old 28th January, 2004, 08:19 PM
E3A E3A is offline
Join Date: January 2004
Posts: 9


4PDA2+ V2.0 maintains the high level of performance as the original version. It provides 2 extra S-ATA ports from Silicon Image SiI3112A that not only delivers a bandwidth up to 150MB/s but also accommodates future SATA on ATAPI (AT Attachment Packet Interface) hardware such as CD-ROMs, DVD-ROMs, and CD writers. In addition, 4PDA2+ V2.0 exploits the SATA specs by providing a S-ATA Hot-plug bracket to let users remove and plug in external S-ATA drives without powering off the system. From the on-board HPT372 RAID controller, 4PDA2+ V2.0 introduces the new RAID 1.5 that delivers RAID 0 performance and RAID 1 data security capabilities with just two hard drives.
[*]2 P-ATA purple IDE ports from HPT-372 with RAID 0,1,0+1,1.5 support


Can the 4PDA2+ support RAID 1.5 with the HPT372 (without N)?

HighPoint affirms that only the HPT372N makes RAID 1.5

The rev 1.X had the HPT372N but rev 2.0 has the HPT372
Reply With Quote