View Single Post
  #3 (permalink)  
Old 5th April, 2004, 05:25 AM
ckngai ckngai is offline
Join Date: April 2004
Posts: 4


Originally Posted by gizmo
Depends on the BIOS, but a lot of times you can't have two different kinds of RAID running at the same time.

As long as you have the drivers for the Highpoint loaded on the OS when you do the image, you should be able to boot from the drive.
thanks for your help gizmo.

May be highpoint raid would not be possible in this case for my pc. However, could those IDE devices that are being connected to highpoint be detected by the OS?
Reply With Quote