View Single Post
  #2 (permalink)  
Old 6th April, 2004, 03:25 AM
timbob2469's Avatar
timbob2469 timbob2469 is offline
Join Date: December 2002
Location: Pa. USA
Posts: 805

paul8811, First off, Welcome to the AOA forum. Have you been plugging this USB device directly into the USB sockets at the back of the motherboard? There are issues using USB 2.0 devices if you use a third party socket that is connected to the pinouts on the motherboard, especially if it is an unshielded cable with 8 loose connectors on the end. The other issue I've seen mentioned is a USB device that won't work correctly unless you use a powered hub, not enough voltage is supplied to run them.
EP-8RDA+ v1.0 3827 bios
XP1700+ JIUHB 175 x 12.5=2187MHz. 1.75v
2 x 512MB Crucial pc3200 10, 2, 2, 2.0
THERMALRIGHT SLK900u 92mm Zalman fan, Enlight 420 watt, AIW 9000 Pro 64mb DDR agp4x, voltage mod 1.85v
Home made NB cooler
AOA Team fah
Reply With Quote