View Single Post
  #4 (permalink)  
Old 29th September, 2004, 01:35 PM
MiL's Avatar
MiL MiL is offline
Member
 
Join Date: September 2003
Location: Croatia
Posts: 14

Yes rev 2.X seems more sensitive than 1.X. I guess I just have to set up a bios and not mess around it much, 'couse everytime I change FSB or mem timings goes into "siren mode". It could be PSU I have a feeling rev 2.X is more power-hungry than 1.X

So can anyone confirm what does that siren tone means? Is it overheating of CPU, bad voltages from PSU or RAM error? And why does it happens after saving and exiting from bios, sometimes during reset, too.
__________________
Reply With Quote