View Single Post
  #4 (permalink)  
Old 24th September, 2008, 09:31 PM
PorPorMe's Avatar
PorPorMe PorPorMe is offline
Join Date: January 2008
Location: Othello, Wa
Posts: 3,207

Here are your pics. As you can see, the tray isn't in. It's got a 2" exauast fan on it.The side panel with the 5 1/2" fan has a speaker cover for it's vent. The front intake has been drilled out as large as practicle on the inside as well as the ouside. At every point where metal contacts metal, a vibration damper has been installed. Fancey verbage for duct tape!
With the addition of the 9600Gt video card and the Freezer Seven Pro and thier fans- this thing is going to sound like a hovercraft. The duct tape is to cut down on as much harmonics as possible. Even the drives get different treatment. I used to use 1 screw just to hold it-easyier to move about. Not this one-everything is secure. Just a little more and it's ready to go!
Attached Thumbnails
1st mod going back in service-jam012.jpg   1st mod going back in service-jam014.jpg   1st mod going back in service-jam016.jpg   1st mod going back in service-jam017.jpg   1st mod going back in service-jam018.jpg  

AOA Team fah

1ST * Asus M5A99FX Pro r 2.0 *AMD FX 8350 Black Edition *Cooler Master MasterLiquid 240 CPU Cooler * Crucial 16g DDR3 * MSI Geforce GTX 1050 * Antec 650w* Thermaltake V9 Case
2nd Asus M5A99fx Pro R2.0 Mainboard *AMD FX 4300 Black edition * l6g Crutial DDR3 * Evga Geforce Gt 730 * Coolermaster Dual fan HSF * 500w Thermaltake PSU * 320g western digital HDD

Reply With Quote