View Single Post
  #22 (permalink)  
Old 22nd April, 2002, 04:41 AM
Posts: n/a

One more thing for you Spyder. Instead of making mounts for the HDD which sits below the upper 3.5" bay, simply take the clip out bracket you are removing and cut the bottom 2/3 of it off. That way you have the mount already made AND it will still clip in and out. It should work just fine...and if you decide you only need 1" of space, just cut the bottom 1/3 of it off.

Good luck and show some pics!
Reply With Quote