sandra.pll

I got sisoft to make me a little file that you put into your sandra directory (replacing your old version) which updates the pll info.

this means it will recognise the kt266a and will see what pci speed it is running at.

http://brad.procooling.com/Sandra.pll

right click on that, click on save target as, and save it into your sandra folder.

[Racerx]

Ah Brad my AGP bus speed is still reporting 84mhz. Thats not what I wanted to see.

[Superman]

Does this update just tell Sandra that the KT266A has 1/5 and 1/6 dividers? That's really no better than the way it was before. Unless teh program can actually come up with a way to measure the PCI mhz, it shouldn't try to tell you.

he said it added support to see the pci speed at speeds that it'd be at 1/5

it recognises it on the xp333. Like if you set it at 1/4 it will go up to 50mhz, or whatever you run at (200mhz in this case)

if you set the xp333 at 1/6 and run it at 200mhz, it will give you 33mhz.

presumably the kt266a will be recognised by sandra like this. So in the kr7 it will stay at 1/4, but in the epox which has the 1/5 and maybe 1/6, it will show the right speeds