AOA Forums AOA Forums AOA Forums Folding For Team 45 AOA Files Home Front Page Become an AOA Subscriber! UserCP Calendar Memberlist FAQ Search Forum Home


Go Back   AOA Forums > Hardware > AMD Motherboards & CPUs

AMD Motherboards & CPUs Questions or comments on AMD products?


Reply
 
LinkBack Thread Tools Rate Thread
  #1 (permalink)  
Old 24th July, 2003, 01:15 AM
Matt McFaul's Avatar
Member
 
Join Date: May 2003
Location: monterey peninsula,ca. usa!
Posts: 155
Send a message via AIM to Matt McFaul

pic of the ABIT MAX 3

check this bad boy out.....hmmmmmm

http://www.clubic.com/scripts/big.php?id=46737

dang that board has a bonebility factor of 10!
__________________
P4@4ghz,16x250 1:1ddr, prommie cooled, 1gb hyperXpc4000@250 8-4-4-3, ic7max3, dual antec true control 550's, dual raptor 36.4 raid 0 16kstrips,bfg 6800 gt oc at 450/1050 danger den nv40 block, audigy 2zs platinum,viewsonic p220f,klipsch promedia 5.1thx.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 24th July, 2003, 01:19 AM
The Spyder's Avatar
Member
 
Join Date: September 2001
Location: Oregon
Posts: 4,086
Send a message via AIM to The Spyder Send a message via MSN to The Spyder

:-o
__________________
~The Spyder~
I7 965, 6gigs, ASUS, 4870 X2, WD640 AALS Lian Li PC65
Nikon D700, 24-70, 70-200 2.8, SB 800x2
1993 Mazda Rx7 R1 345whp. 2008 Mazda 3 Hatch
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 24th July, 2003, 01:38 AM
cloasters's Avatar
Asst. BBS Administrator
 
Join Date: September 2001
Location: Location, Location
Posts: 21,956

Dang, the link is refusing to complete. Sigh.
__________________
When the world will be better.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 24th July, 2003, 04:42 AM
The Spyder's Avatar
Member
 
Join Date: September 2001
Location: Oregon
Posts: 4,086
Send a message via AIM to The Spyder Send a message via MSN to The Spyder

Quote:
Originally Posted by cloasters
Dang, the link is refusing to complete. Sigh.
Attached Thumbnails
pic of the ABIT MAX 3-img46737.jpg  
__________________
~The Spyder~
I7 965, 6gigs, ASUS, 4870 X2, WD640 AALS Lian Li PC65
Nikon D700, 24-70, 70-200 2.8, SB 800x2
1993 Mazda Rx7 R1 345whp. 2008 Mazda 3 Hatch
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 24th July, 2003, 05:19 AM
Matt McFaul's Avatar
Member
 
Join Date: May 2003
Location: monterey peninsula,ca. usa!
Posts: 155
Send a message via AIM to Matt McFaul

so,

they do intend to make an AMD model right????
__________________
P4@4ghz,16x250 1:1ddr, prommie cooled, 1gb hyperXpc4000@250 8-4-4-3, ic7max3, dual antec true control 550's, dual raptor 36.4 raid 0 16kstrips,bfg 6800 gt oc at 450/1050 danger den nv40 block, audigy 2zs platinum,viewsonic p220f,klipsch promedia 5.1thx.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 24th July, 2003, 05:22 AM
funnyperson1's Avatar
Member
 
Join Date: September 2002
Location: Blacksburg, VA aka Vtech
Posts: 592
Send a message via AIM to funnyperson1

umm...why is this in the AMD section?
__________________
Biostar TForce550
A64 X2 3600+ (65nm)@2.9 (1.4V)
TR Ultra 90
2GB Crucial Ballistix 6400@ DDR2 1000 C5
Geforce 7900GS
2x160gig hdd with WinXP, Vista, and Ubuntu
member of FOLDING@HOME team 32
Latitude D620 with XP, Ubuntu Gutsy Gibbon
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 24th July, 2003, 05:35 AM
Matt McFaul's Avatar
Member
 
Join Date: May 2003
Location: monterey peninsula,ca. usa!
Posts: 155
Send a message via AIM to Matt McFaul

um.....

just testing to see how many intel fans are scoping out the amd section....hahaha.....gotcha...Ill add your name to the list...hehe
__________________
P4@4ghz,16x250 1:1ddr, prommie cooled, 1gb hyperXpc4000@250 8-4-4-3, ic7max3, dual antec true control 550's, dual raptor 36.4 raid 0 16kstrips,bfg 6800 gt oc at 450/1050 danger den nv40 block, audigy 2zs platinum,viewsonic p220f,klipsch promedia 5.1thx.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 24th July, 2003, 03:28 PM
funnyperson1's Avatar
Member
 
Join Date: September 2002
Location: Blacksburg, VA aka Vtech
Posts: 592
Send a message via AIM to funnyperson1

hah, my sig is outdated. I now have a Tbred 1700+ and nforce2 mobo. Also I am only a fan of money in my pocket I could care less which company allows me this luxury.
__________________
Biostar TForce550
A64 X2 3600+ (65nm)@2.9 (1.4V)
TR Ultra 90
2GB Crucial Ballistix 6400@ DDR2 1000 C5
Geforce 7900GS
2x160gig hdd with WinXP, Vista, and Ubuntu
member of FOLDING@HOME team 32
Latitude D620 with XP, Ubuntu Gutsy Gibbon
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 24th July, 2003, 11:31 PM
cloasters's Avatar
Asst. BBS Administrator
 
Join Date: September 2001
Location: Location, Location
Posts: 21,956

Quote:
Originally Posted by Matt McFaul
they do intend to make an AMD model right????
Maybe they already do? I've seen another Abit m'board that features the ducted airflow around the power MOS-FET's. I think. Thanks for posting the pic, Spyder!
__________________
When the world will be better.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 25th July, 2003, 12:19 PM
CCW's Avatar
CCW CCW is offline
Member
 
Join Date: March 2003
Location: Suffolk, UK
Posts: 345

Theres a thread on this by me in Intel section.

Craig
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old 26th July, 2003, 09:01 PM
Jethro's Avatar
Member
 
Join Date: July 2003
Posts: 51

/me is hoping like hell they come out with a kt600 max3 oh man that would rock!
__________________
Epox8k3a TB 1700+ @ 2.45 1.85vcore 1/2 MAze3 cooled ~2x256 Samsung DDR @ 204
Chieftec ALuminum 601 //Sparkle 350
Netgear cable router RP614/3com905cTX~lan//SB AUdigy mp3+
WD special 80's x2 and 1x 20 // Sony 48x24x48
Hitachi7515~19inch .22dp ~ BB ATI 9600pro 540/351
Thrustmaster Fox 2 pro usb// Nostromo n50// IBM opti mouse
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old 27th July, 2003, 04:23 AM
Member
 
Join Date: March 2003
Posts: 120

kt600 = no pci or agp lock = poo.
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old 27th July, 2003, 06:25 AM
Matt McFaul's Avatar
Member
 
Join Date: May 2003
Location: monterey peninsula,ca. usa!
Posts: 155
Send a message via AIM to Matt McFaul

lol

Quote:
Originally Posted by Gokou
kt600 = no pci or agp lock = poo.
yeah I can hear ya there.....supposedly we were to hear more about this thing on the 25th which was yesterday? Many searches later I havent got much info....sure would be nice to switch to intel for this board....pop a 3.2 in there and hook up the prommie.....damn this addiction!
__________________
P4@4ghz,16x250 1:1ddr, prommie cooled, 1gb hyperXpc4000@250 8-4-4-3, ic7max3, dual antec true control 550's, dual raptor 36.4 raid 0 16kstrips,bfg 6800 gt oc at 450/1050 danger den nv40 block, audigy 2zs platinum,viewsonic p220f,klipsch promedia 5.1thx.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #14 (permalink)  
Old 31st July, 2003, 02:37 PM
CCW's Avatar
CCW CCW is offline
Member
 
Join Date: March 2003
Location: Suffolk, UK
Posts: 345

Quote:
Originally Posted by Jethro
/me is hoping like hell they come out with a kt600 max3 oh man that would rock!
/me mixes some epoxy, pulls out the hacksaw and sticks some sinks on fet's
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #15 (permalink)  
Old 31st July, 2003, 02:54 PM
Jethro's Avatar
Member
 
Join Date: July 2003
Posts: 51

Quote:
Originally Posted by CCW
/me mixes some epoxy, pulls out the hacksaw and sticks some sinks on fet's

well there are no plans for Abit MAX3 kt600 board =/ Guess ill needa cut up sinks again to
__________________
Epox8k3a TB 1700+ @ 2.45 1.85vcore 1/2 MAze3 cooled ~2x256 Samsung DDR @ 204
Chieftec ALuminum 601 //Sparkle 350
Netgear cable router RP614/3com905cTX~lan//SB AUdigy mp3+
WD special 80's x2 and 1x 20 // Sony 48x24x48
Hitachi7515~19inch .22dp ~ BB ATI 9600pro 540/351
Thrustmaster Fox 2 pro usb// Nostromo n50// IBM opti mouse
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #16 (permalink)  
Old 1st August, 2003, 10:10 AM
GREEKRAGE's Avatar
Member
 
Join Date: May 2003
Location: Greece
Posts: 97

I saw a review about this board a while ago and it wasnt all that its looks promise.

Even though the mosfets have a cooling solution they got very hot
mostly cause Abit made the wind tunnel with a weak ass fan.
Also note that the NB cooler will prevent usage of a big Hs on the cpu (like a zulman).

If anyone does gert this board make sure your stuff fits on it and first thing you do is change the mosfet fan to a stronger one.
__________________
AMD 2600+Tb @2400 MHz (12.x200 )
Cooler: Thermalright SLK-800U (37c idle-43 load)
Epox 8RGA+ A2
2x256 PC400 DDR Kingston(11-2-2-2)(valueram)
Club3D Radeon 9700pro cooled by a GIANT2 by Thermaltake
HDD Maxtor 133 8mb cache
Case: highly modded YY cube
PSU: Levicom 420
Latest 3dmarks = 2K3 5313 and 2k1 16137
OS:Win2k(sp3)-WinXP pro
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #17 (permalink)  
Old 1st August, 2003, 02:40 PM
Matt McFaul's Avatar
Member
 
Join Date: May 2003
Location: monterey peninsula,ca. usa!
Posts: 155
Send a message via AIM to Matt McFaul

Quote:
Originally Posted by GREEKRAGE
I saw a review about this board a while ago and it wasnt all that its looks promise.

Even though the mosfets have a cooling solution they got very hot
mostly cause Abit made the wind tunnel with a weak ass fan.
Also note that the NB cooler will prevent usage of a big Hs on the cpu (like a zulman).

If anyone does gert this board make sure your stuff fits on it and first thing you do is change the mosfet fan to a stronger one.
doh, dang good point there! Why do i always forget about that part?
__________________
P4@4ghz,16x250 1:1ddr, prommie cooled, 1gb hyperXpc4000@250 8-4-4-3, ic7max3, dual antec true control 550's, dual raptor 36.4 raid 0 16kstrips,bfg 6800 gt oc at 450/1050 danger den nv40 block, audigy 2zs platinum,viewsonic p220f,klipsch promedia 5.1thx.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #18 (permalink)  
Old 1st August, 2003, 05:14 PM
CCW's Avatar
CCW CCW is offline
Member
 
Join Date: March 2003
Location: Suffolk, UK
Posts: 345

Id take the OTEs system of and put copper sinks on all the fets myself if i ever had the moeny for that board and a p4 chip

Craig
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Abit AN7 xp QSDT AMD Motherboards & CPUs 0 12th August, 2005 03:54 AM
Abit IC7-G help Viper66 Intel Motherboards & CPUs 7 5th February, 2004 07:16 PM
Abit at7 max q's! The Spyder AMD Motherboards & CPUs 8 16th July, 2002 10:50 PM
Abit BD7M - Abit bring forth badness. The Daishi Intel Motherboards & CPUs 4 10th April, 2002 08:24 PM


All times are GMT +1. The time now is 02:55 AM.


Copyright ©2001 - 2010, AOA Forums
Don't Click Here Don't Click Here Either

Search Engine Friendly URLs by vBSEO 3.3.0