AOA Forums

AOA Forums (http://www.aoaforums.com/forum/index.php)
-   Cooling & Temperature Monitoring (http://www.aoaforums.com/forum/forumdisplay.php?f=34)
-   -   Water Cooler is DONE (http://www.aoaforums.com/forum/showthread.php?t=6357)

SiGmA_X 14th June, 2002 05:12 AM

Water Cooler is DONE
 
I just finished the watercooler, with Spyders help (Majorly!).

Thank you to everyone on AOA who helped with ideas, and a major thankyou to Spyder.

Images will be up later.

Intrepid6546 14th June, 2002 08:31 AM

congrats. I wasn't able to order my case because we got distracted with a movie adn my dad wont be back until saturday, he is on a buisnes trip.

-shaun

Allan 14th June, 2002 12:54 PM

Can't wait for the pics!!

Samuknow 14th June, 2002 04:11 PM

Re: Water Cooler is DONE
 
Quote:

Originally posted by SiGmA_X
I just finished the watercooler, with Spyders help (Majorly!).

Thank you to everyone on AOA who helped with ideas, and a major thankyou to Spyder.

Images will be up later.

What a tease.

It's done but we can't see it. Well I look forward to seeing it..

SiGmA_X 14th June, 2002 05:38 PM

Can't see it becuase its a mess and my cam is giving fuzzy pics. I'll upload some when I get home.

Why is my temp at about 49C at load, and 42C idle? The 120mm is at 7v, so that also might be part of the problem... ?

chazz469 14th June, 2002 09:07 PM

Quote:

Originally posted by SiGmA_X
Why is my temp at about 49C at load, and 42C idle? The 120mm is at 7v, so that also might be part of the problem... ?
Could be the voltage/fan speed. What's on your rig? I'm having a similar problem. Using the MAZE3 proc temp is about 10-12°C above ambient. Should be cooler.

Can't wait for the pics!

SiGmA_X 15th June, 2002 02:08 AM

Nope. It was that when I was switching the fan from 12v to 7v, I didnt replug all the cables :rolleyes: Now its back to a nice cool 45C at full load (7v). Ir drops to 42C under full load if I just set the fan to 12v... :)

SiGmA_X 15th June, 2002 02:09 AM

The stuff is as follows:
Soyo Dragon +
XP1600+
512MB DDR266 PC-2100

Gemini Cool Spir@l WB
Basic DTek radiator
VIA Aqua 1300 pump (370GPH)
120mm fan @ about 120cfm(12v)/126cfm(7v)

Samuknow 15th June, 2002 03:51 AM

Quote:

Originally posted by SiGmA_X
120mm fan @ about 120cfm(12v)/126cfm(7v)
???? more at less volts????

SiGmA_X 15th June, 2002 06:26 AM

No. I ment like 60cfm @ 7v...

Here's all the pics I have from making the cooler. Sorry, but I wasn't making a review :p

http://fusiongamez.com/~sigma_x/cooling/lianli_1.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_2.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_3.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_4.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_5.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_6.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_7.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_8.gif
http://fusiongamez.com/~sigma_x/cooling/lianli_9.gif

Samuknow 15th June, 2002 04:21 PM

Sweet setup.

I am still trying to convince mysely to do that. I still have that old theory of water+electronics=dead stuff.

I still have that chiller with the pump and my try that. Might get the water too cold though. The 2 amazing positives of water. QUIET and lower temps.

Great job Sigma

SiGmA_X 15th June, 2002 06:21 PM

Thanks. I want to thank Spyder right now before he gets on my @55 about it. He helped me with modding the case (I wish we all had shops like his!) and setting up the watercooler.

The worst thing is that the pump viberates, but I am going to put it in a Tuppperware containor today, and seal the holes in the top. That should stop it.

Holst 15th June, 2002 07:56 PM

Very nice.

My pump vibrates a bit too.

It is much quieter when submerged (flow is better too) and I put mine on some bobble wrap and that made it silent.

Samuknow 15th June, 2002 08:49 PM

How is it sitting in your case? I mean is it mounted or just sittin there? You should mount it some how with rubber mounts. Even using a cut up mouse pad under it will help. It will also eat up some of the noise.

Monkeyboy 15th June, 2002 09:07 PM

wow, what are rads used for?

The Spyder 18th June, 2002 04:52 AM

Rad= Radiators, they Disipate the heat put out and retracted from the waterblocks
SPyder

JFettig 18th June, 2002 04:56 AM

that heatercore looks just like mine! 89camaro

the problem with the temps is the fan placement... you need a duct to use the whole space on the rad... and if possible have the fan sucking thru the heatercore.. better results.. and have it suck fresh air...

robbie 18th June, 2002 05:36 AM

Hey maskedgeek, I remember your avatar from OC.com Good to PULL err I mean have you here.
So have you checked out our FOLDING section yet?
Rob

JFettig 18th June, 2002 05:38 AM

nope but im heading over there rite now, oc.com has been down for like the last 6hrs for some unknown reason....

Orbit 24th June, 2002 04:28 PM

I'm using a Maze3 on my XP1800 @ 144fsb / 1.8 vcore / 2.7 vdimm and my cpu temp is only 2-3 degrees C above system. But, I also have my radiator mounted in a separate external box, with the pump and an a/c fan.

I'm running around 35 - 36 C CPU under normal load. room temp is about 27 C.

I live in the southwest US, it's extremely hot and dry at the moment, has been for the last two or three weeks, so I have the side cover off and a nice little 20" box fan blowing over the rad and the inside of the case. When I turn on the big fan, the system temp drops to around room temp. There's a bit of heat in that thing, but it's still quieter than all the fans I had when it was air cooled. Without the box fan, my system temp reads about 2-3 C below the CPU temp. All of this is according to the bios / MBM readings.

I was skeptical of water cooling, too, Samuknow, that's why I did the external radiator/pump, to eliminate the most sources of possible leaks. The added benefit is that it leaves all my room in the main case, it's cooler than having it all self contained. The downside is, it's not very portable, so if you're one who has to move a lot, I wouldn't suggest my setup.


All times are GMT +1. The time now is 04:51 PM.


Copyright ©2001 - 2010, AOA Forums


Search Engine Friendly URLs by vBSEO 3.3.0