| |||||||
| EPoX MotherBoards EPoX Intel and AMD Motherboards. |
 |
| | LinkBack | Thread Tools | Rate Thread |
25th October, 2003, 04:00 AM
| ||||
| ||||
| 8rda3+ No Power On The Mobo My 8RDA3+ arrived today and for whatever reason I can not get the board to show any power anywhere. I have the REV 2.0 and I am using an Antec 400 watt P/S that has the 12v additional plug. I had both the ATX and the 12v 4 conductor wired to the MOBO. I removed my old 8RDA+ that was working using the same componets and I get no BOOT. Anybody have a clue as to what I have done wrong? I had to remove the board and put the 8RDA+ back in so I could go online. I am waiting for a new case/power supply to build the new board, but I got in a hurry to try it out the new MOBO and ended up being disappointed....
__________________      |
|
25th October, 2003, 07:55 PM
| |||
| |||
| CMOS jumper in the NORMAL position? Lead from front panel on the right two prongs to turn it on? Board was not grounded incorrectly upon installation?
__________________ Golf is a good walk spoiled! ( Mark Twain ) Abit NF7-S rev 2.0 Barton 2500 AQZFA0340SPMW 11 x 214 w/SLK900A & 92 mm fan (38 deg C) 2 x WD400JD---Gainward Ti4200 8 X AGP Twinmos PC3200 w/ Winbond chips 2 X 256 600 watt dual fan psu Abit NF7-S rev 2.0 XP1700DLT3C 10 x 225 SK7 with 80mm smartfan ( 37 deg C ) Gainward FX5200 128 Mb DDR 2 x 40 Gb Maxtor ATA 133 drives Buffalo PC3200 2 x 256 CH5 chips 650 watt dual fan power supply WinXP Pro, SP1, nVidia 3.13 on both |
|
26th October, 2003, 02:39 AM
| |||
| |||
| More info please.
__________________ EPOX 8RDA3+ rev 1.0 @stock 8RD33526BIOS AMD Athlon XP 2400+ 266Mhz Thoroughbred B0 AXDA2400DKV3C 9307613350680 AIUHB0316MPH 27648 Thermaltake Volcano 12 (Arctic Silver Ceramique) Vantec ICEBERQ CCB-A1C Two Apacer 512MB PC3200 Maxtor 80GB UDMA 133 7200 rpm 2MB Buffer 6Y080L0 ViewSonic VE500 Enermax 365P-VE Gainward GF4 4800SE 64M AGP8x LiteOn 40x12x48x CDRW ASUS CD-S520/A 52x Creative Modem Blaster 56kPCI Internal DI5655 Chicony USB keyboard A4tech MOP17 USB mouse |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Rate This Thread | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Green (power) light won't go off on my 8RDA3+ | KrayZeeZ | EPoX MotherBoards | 3 | 4th June, 2004 01:16 PM |
| 8rda3+ power problem | onEeye | EPoX MotherBoards | 2 | 12th April, 2004 11:25 AM |
| EP-8RDA3+ power problem | H4D3S | EPoX MotherBoards | 7 | 7th November, 2003 05:14 AM |
| AGH! Several props with 8RDA3+ mobo! | DarkCarnival | EPoX MotherBoards | 21 | 16th July, 2003 02:53 PM |
| Need source for mobo power cables | Flymo | Case Modifications | 2 | 30th May, 2002 03:12 PM |
