AOA Forums

AOA Forums (
-   Graphics and Sound cards; Speakers and other Peripherals (
-   -   Flashrom/9600P Problem (

bETAbILLY 1st November, 2003 02:56 AM

Flashrom/9600P Problem
Help. I was trying to save my Sapphire 9600Pro black pcb bios using the following syntax: ATIFLASH -S 0 <name.rom> but neither the AtiFlash or flashrom progs detect "adaptor 0".

Does this mean my cards bios is protected?

TonyCarr 30th November, 2003 03:13 AM

I had a ATI radeon 9600 pro and I tried all the flashing programs , to no avail , the bios is not only write protected but locked , can't even access the version or info in the bios .

bETAbILLY 1st December, 2003 04:28 AM

I finally cracked my bios open with FLASHROM, looked at the code with a bios editor but couldnt find anything worthwhile to alter....damm 9600P still doesnt want to get up and run with the dogs.

Found a bad capacitor on it, had a domed top, took a 470mfd 16v cap off an old mainboard and changed the bad one.

All times are GMT +1. The time now is 12:19 AM.

Copyright ©2001 - 2010, AOA Forums

Search Engine Friendly URLs by vBSEO 3.3.0