AOA Forums

AOA Forums (
-   Hardware Hacking (
-   -   -> Mod your 6800GS AGP to Ultra Extreme with coolermod! (

stanzlavos 4th November, 2006 01:22 PM

I Tried Unlockin Ma Evga 6800gs.....

But I Cud Unloch Ony The Vertex Pipeline And When I Unlock The Pixel Pipeline......i Get Artifacts While Playin Games ???....

Does It Have Anything To Do With The Drivers I Am Using ????

dsio 4th November, 2006 01:29 PM

No, just bad luck I'm afraid mate. What are your temperatures like?

stanzlavos 5th November, 2006 11:03 AM

u dont wanna knwo bout the temps man........

ther is some serious temp issues with ma card.........thinks its coz of the thermal getting some soon.....

the ambient temp is bout 60....and while playin games it goes as high as 90...:(

Necorum 12th November, 2006 09:22 PM

115 is the cutoff right? wel mine is on my ultra

60 ambient is normal on my card in the winter

mbataka 12th December, 2006 04:49 AM

PPLE what to do with Diablotek 6800GS ultra 512mb AGP brand new condition not used 7 months. purchased from Which is fully functional in dos mode (except some artifacts)NOT WORKING UNDER WINDOWS. Which geeks and diablotek was not responding any to email and phone. payed for that **** 280$ . ANY suggestions???

Samuknow 12th December, 2006 12:18 PM

Give geeks .com a few days. I bought a board from them that had to be replaced twice. It did take some time for them to get back to me.

So you can see your bios and boot up POST but nothing once your in windows?

mbataka 13th December, 2006 02:10 AM

Yeah geeks not answering e-mail at all. So it was a wrong investment. Ok. Its almost forgotten issue for me but i'll tell you one more time what was happening.

Its shows artifacts in boot post, also on on windows loader screen. It will work under windows but when the drivers are not installed. (or in safe mode) After installing drivers and rebooting the windows screen going crazy every where too many artifacts , video dissortion many colorful lines, and which is bad, its impossible to work (get driver details, go to managment console etc. freezing screen not refreshing, Picture in picture everywhere. ) By the way i was posting in here all the details,0/
if some one interested.

So my question is. Is it possible to get this card repaired , change something or HOW TO DESTROY it. ??

By the way its a NV41chip with HSI bridge (PCI-E to AGP)

Samuknow 13th December, 2006 03:11 AM

That is what my last card did...In a word FRIED....

wward 17th December, 2006 04:55 AM

6800 gs oc cooler
anyone know a good after market cooler

dsio 17th December, 2006 10:00 AM

Get the Zalman. Its always had good reviews and is considered a top performer.

Zalman VF-700.

Samuknow 17th December, 2006 02:54 PM


Originally Posted by wward
anyone know a good after market cooler

With your temps as high as you told me, I would absolutely look into after market cooling. I went back to water on my GPU again to keep the temps down. Plus it does wonders for the noise level...

slipknot3195 1st February, 2007 03:08 PM

Hi, guys
hi,guys. I'm new, just registered today :p

slipknot3195 1st February, 2007 03:14 PM

I have used the XFX6800gs for 6 months.... do you believe that I have never done any overclocking before. After I found this website, it's like the motivation!!! I have read through the instruction on the first page, and I follow that.
==> This is problem I encountered
After flashing the bios, I restart the PC, then after the window xp loading, the monitor show strange display for fer second, then everything shut down Y_Y. i have to do the "biosback" so that i can use the PC as normal. SO, what have I done wrong????

Please help, thanks.

captinhector 1st February, 2007 03:33 PM

What the are settings you have used in your bios?

slipknot3195 1st February, 2007 03:40 PM

The original is 350/500, I have clocked it to be 428/1070 before modding the bios pipeline 12/5 (my card can not go to 16/6 Y_Y)
I set the mod bios as 450/1110, I just wonder now is my problem consequence from the disable pipeline? Does this modification require 16/6 ??

Thank you for your answer :)

slipknot3195 1st February, 2007 04:18 PM

1 Attachment(s)
This is before modding the bios

slipknot3195 2nd February, 2007 02:05 PM


Samuknow 2nd February, 2007 03:11 PM

Your GPU may be a little high. Try backing it down to stock and see if it will boot. Do a normal oc, OC it in windows to make sure it can handle the OC you want to flash it to before flashing the bios....

slipknot3195 2nd February, 2007 04:04 PM

will do accordingly, thanks.

slipknot3195 2nd February, 2007 04:31 PM

I tried but get the same result.... WTH?!?!?
350/500(1000) as defaults but modding is still disappointed.
Or maybe this card is black sheep??

All times are GMT +1. The time now is 09:54 AM.

Copyright ©2001 - 2010, AOA Forums

Search Engine Friendly URLs by vBSEO 3.3.0